Raspberry Pi Pi-GPIO User Guide

Overview

This is an I/O expansion kit designed for Raspberry Pi, which provides 4 sets of 2x20 pinheaders, that means a handy way to "stack" multi different HATs together, and use them as a specific combination / project.

Features

Standard Raspberry Pi connectivity, directly pluggable OR through ribbon cable
4 sets of 2x20 pinheaders, connect multi HATs together
Clear and descriptive pin labels for easy use
Reserved jumper pads on the bottom side, pin connections are changeable by soldering, to avoid pin conflicts

Note: make sure there are no any pin conflicts between the HATs you want to use together before connecting.

Photo

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi 5 Wiki Raspberry Pi 6.25 inch DSI Display MIPI LCD Capacitive TouchScreen 720x1560 Raspberry Pi MIPI Attitude Sensor SpotPear Industrial USB TO 8CH TTL Converter USB to UART Multi Protection Circuits Multi Systems Milk-V Duo ESP32 C3 ST7735 Code 3.5inch RPi LCD (A) Manual Configuration Milk V Duo IO Board Raspberry Pi UGV Rover ROS2 PT AI OpenCV Robot Car MediaPipe ESP32-S3R2 Jetson Nano Raspberry Pi Pico 2 RP2350B 4.3inch Capacitive TouchScreen 4.3 inch LCD Display Development Board 800×480 Raspberry Pi Camera Raspberry Pi USB Camera 12MP IMX378 30fps onboard dual microphones Also For Jeston / RDK Raspberry-Pi-GPIO-Audio-amplification-PWM-Sound-Card-Speaker-Buzzer ESP32-S3N8R8 7inch LCD Display TouchScreen 800&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;times;480 WiFi Bluetooth CAN RS485 Sensor

Raspberry Pi Pi-GPIO User Guide

Overview

Features

Photo

To：

Email(support)

Raspberry Pi IO Board GPIO interface expansion board stacks up to 3 HATs at once