• sales

    +86-0755-88291180

Raspberry Pi Pico-4DIG-8SEG-LED-Module User Guide

1. Please refer to the official link to install Thonny IDE https://projects.raspberrypi.org/en/projects/getting-started-with-the-pico/2

2. Connect the hardware



3. Run the program

Open the software to connect to Pico 

Open the corresponding program file (Pico 4DIG 8SEG LED Module.py) and run the program 

Phenomenon:

Run the nixie tube program, the nixie tube display increases by 1 every time from 0000 to 9999. 

TAG: NVIDIA Jetson Orin Nano Developer Kit Official Original 8GB AI 40Tops For Embedded and Edge Systems Raspberry Pi PCF8591 expansion board LED GPIO IO test ADC/DCA Sensor Beginner board USB To CAN FD Information Arduino Thermal imaging camera UGV Rover PT Kit AI OpenCV Robot Car MediaPipe For Jetson Orin Flash Firmware Flashing and Erasing User Guide Jetson Orin Raspberry Pi 5 CR2032 ESP32 P4 Development Board 7inch Display 7 inch TouchScreen Onboard ESP32-C6 Camera 1024×600 ESP32-S3 GC9A01A Raspberry Pi 10.1 inch QLED Quantum Dot Display 1280x720 Capacitive Touchscreen For Computer PC/Jetson/Game Jetson Orin 4G/3G/2G expansion board GNSS GPS SIM7600G-H-M.2 Raspberry Pi Pico 2 RP2350 1.69 inch LCD TouchScreen Development Board 240x280 1.69inch Display QMI8658 6-Axis Luckfox Pico Camera User Guide Program Omni-Directional Lidar SpotPear Raspberry Pi 5 PCIe to SSD ESP32-C6 2.8inch LCD Display Capacitive AI Development Board 240×320 2.8 inch TouchScreen