0.96inch OLED (B)

Introduction

0.96inch OLED, SPI/I2C interfaces, straight/vertical pinheader

Resources

Question:

What is the electricity voltage of the system working with an OLED module?

Answer:

The OLED module should work at a system with 3.3V operation voltage. However, it can work properly at a system with 5V operation voltage as well, the aging test (more than 24 hours) shows.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： USB TO RS485 Spotpear Milk-V Duo S Usage of USB Type A interface SpotPear GC9A01 Raspberry Pi Black SpotPear Raspberry Pi 5 Case Spotpear Raspberry Pi PICO Vertical Drag Instructions Raspberry Pi Pico 2 RP2350 With 0.96 inch LCD Display 0.96inch Screen 160×80 Onboard RP2350A luckfox-pico-ultra-w-gpio Use electronic Tag Jetson Nano Fan Workstation electronic Nameplate GC2083 STM32 downloader Raspberry Pi 5 Sound Card

0.96inch OLED (B)

Introduction

Resources

To：

Email(support)

0.96inch OLED, SPI/I2C Interfaces, Straight/Vertical Pinheader