• sales

    +86-0755-88291180

ESP32C3 code test

1】 Download the package and unzip it

2】 Turn the dial switch of 3 in the board to ESP32C3, press RST, and the computer will recognize USB

3】 LED test: Open the extracted folder and enter ESP32_ LED

Click on Tools to configure the parameters as follows:


Burning result: IO10 LED lights will flash.

4】 WIFI test: enter the WIIF folder, open WIFI, ino

The parameter configuration is the same as the LED test above

Burn result: Open the phone's WIFI and you can see an "ESP32_ The WIFI name and password for C3AP1 are: 12345678


TAG: SpotPear Raspberry Pi 1.54inch OLED BG95-M3-Zero QuecPython EVB development support LTE/EGPRS and GNSS 0.99inch Raspberry Pi 2-Channel Isolated CAN Bus Expansion HAT Dual Chips Solution Built-In Multi Protections 1.54inch OLED user guide ESP32-S3 1.69inch LCD Display With QST Attitude Gyro Sensor QMI8658C For Arduino Python Raspberry Pi Monitor Official Original DisplayScreen 15.6 inch LCD Full HD 1920x1080 15.6inch Raspberry Pi 5 PCM5122 I2S Audio Card DAC Also For PI4 /PI3 /Zero Series BPI Industrial USB TO RS232/485 (C) UART FT232RNL 2m For 3.3V / 5V For Switchable RS232/RS485 Raspberry Pi 0.85inch LCD Industrial RS232 to RS485 Raspberry Pi 5 PCIe to 4-CH PCIe FFC HAT Board Pi5 4 Channels Raspberry Pi Camera Raspberry Pi DA7212 I2S Audio For XiaoZhi AI Expansion Board Dul-mic Free-Driver For PI5/PI4/Zero spotpear Raspberry Pi Pico 1.54inch LCD display 240×240 IPS 1.54 inch screen Industrial RJ45 Ethernet To 16-ch Relay Module Modbus RTU TCP With Protection and guide rails Raspberry Pi Pico 2 RP2350 USB A Development Board RP2350A