Raspberry Pi RS485 RS232 HAT
Features At A Glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Using the combination scheme of SC16IS752, SP3485 and SP3232, one RS485 and one RS232 can be extended through the SPI interface
- On-board resettable fuse and protection diode can ensure the stable output of RS485 current and voltage, prevent overcurrent and overvoltage, and improve shock resistance
- On-board TVS (transient voltage suppression tube), which can effectively suppress the surge voltage and transient peak voltage in the circuit, and protect against lightning and static electricity.
- Reserve SPI control interface, which is convenient for main control boards such as Arduino
- Comes with development resources and manual (examples for Raspberry Pi/Arduino)
Product parameters
- Serial port expansion chip: SC16IS752
- Communication interface: SPI
- RS485 transceiver: SP3485
- RS232 transceiver: SP3232
- Serial communication rate: up to 921600bps
- Working voltage: 5V
- Diameter of positioning hole: 3.0mm
- Product size: 65mm × 56.5mm
Based on Raspberry Pi 40pin GPIO interface
Suitable for Raspberry Pi series motherboards
Support RS485 and RS232 interface
RS232 function: full duplex communication, the transceiver is SP3232
RS485 function: semi/automatic communication, transceiver is SP3485
Anti-overcurrent and anti-overvoltage
On-board TVS (transient voltage suppression tube) and resettable fuse can effectively suppress the surge voltage and transient peak voltage in the circuit, and improve the shock resistance
Interface definition
What's On Board
- Raspberry Pi GPIO interface
Easy access to the Raspberry Pi board
- MCU control interface
Easy access to main control boards such as Arduino
- RS485 interface
- RS232 interface (DB9 male)
- SC16IS752 Extended serial port chip
- SP3485 RS485 Transceiver
- SP3232 RS232 Transceiver
- π142 digital isolator chip
- PC817 optocoupler isolation
- B0505LS Power Isolation Module
- RT9193-33 power chip
- TVS Diode Array
- Resettable fuse
- Status Indicator
PWR: Power indicator
RXD/TXD: serial port transceiver indicator - RS485 120Ω termination resistance switch
Can be connected to CR2032 coin cell battery - Interrupt pin switching
Default D24 pin, can be changed to D16/D12/D25 pin by soldering 0 ohm resistor
- RS485 working mode switch
Semi-automatic: A=1, B=0
Fully automatic: A=0, B=1