【Overview】

[] The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.

【Product Features】

[] Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS

[] Supports UART and I2C communication

[] Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity

[] Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function

[] Supports 1PPS

[] UART communication baudrate: 9600~921600bps (115200bps by default)

[] Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts

[] 2x LEDs for indicating the module working status

[] Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Jetson Nano/Arduino/ESP32)

【Product Parameters】

[] GNSS : GPS/GLONASS/Galileo/BDS/QZSS

[] CHIP PLATFORM : AG3352

[] L1 BAND RECEIVER

CHANNELS : 47 Tracking ch

SBAS : Support

[] A-GNSS : Support

[] SENSITIVITY

ACQUISITION : -147dBm

RE-ACQUISITION : -159dBm

TRACKING : -166dBm

[] TTFF (TIME TO FIRST FIX)

COLD STARTS : 

26s, Autonomous

12s, With EASY™

5s, With EPO™

WARM STARTS : 

20s, Autonomous

2s, with EASY™

HOT STARTS : 1s

[] POSITION ACCURACY : 1.5m CEP

[] SPEED ACCURACY : 0.1m/s

[] ACCELERATION ACCURACY(MAX) : 0.1m/s²

[] TIMING ACCURACY : 30ns

[] UPDATE RATE (MAX) : 10Hz

[] I2C RATE : 400Kbps (Max)

[] UART BAUDRATE : 

Range: 9600~921600bps

Default: 115200bps

[] GNSS DATA UPDATE RATE : 

Max: 10Hz

Default: 1Hz

【Compatible With Multiple Platforms】

[] Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino Demos And User Manuals, Easier To Develop And Integrate, And Better Expansibility

[] Do not include Raspberry Pi and other controller boards

【Multi-GNSS Positioning Support】

[] Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS

【What's On Board】

【PINOUT DEFINITION】

[] VCC : Power supply (3.3V/5V)

[] GND : Gound

[] TX : Connect to MCU.RX (Signal direction: TX >> MCU.RX)

[] RX : Connect to MCU.TX (Signal direction: MCU.TX >> RX)

[] PPS : GPS status indicator

[] RST : Reset Pin

[] SDA : I2C data pin

[] SCL : I2C clock pin

【Outline Dimensions】

【Video】

1. LC76G GNSS Module x1
2. GH1.25 8PIN cable x1