Google Chat: zj734465502@gmail.com
+86-0755-88291180
sales01@spotpear.com
dragon_manager@163.com
services01@spotpear.com
manager01@spotpear.com
WhatsApp:13246739196
$14.89
The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.
【Overview】
[] The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.
【Product Features】
[] Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS
[] Supports UART and I2C communication
[] Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity
[] Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function
[] Supports 1PPS
[] UART communication baudrate: 9600~921600bps (115200bps by default)
[] Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts
[] 2x LEDs for indicating the module working status
[] Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Jetson Nano/Arduino/ESP32)
【Product Parameters】
[] GNSS : GPS/GLONASS/Galileo/BDS/QZSS
[] CHIP PLATFORM : AG3352
[] L1 BAND RECEIVER
CHANNELS : 47 Tracking ch
SBAS : Support
[] A-GNSS : Support
[] SENSITIVITY
ACQUISITION : -147dBm
RE-ACQUISITION : -159dBm
TRACKING : -166dBm
[] TTFF (TIME TO FIRST FIX)
COLD STARTS :
26s, Autonomous
12s, With EASY™
5s, With EPO™
WARM STARTS :
20s, Autonomous
2s, with EASY™
HOT STARTS : 1s
[] POSITION ACCURACY : 1.5m CEP
[] SPEED ACCURACY : 0.1m/s
[] ACCELERATION ACCURACY(MAX) : 0.1m/s²
[] TIMING ACCURACY : 30ns
[] UPDATE RATE (MAX) : 10Hz
[] I2C RATE : 400Kbps (Max)
[] UART BAUDRATE :
Range: 9600~921600bps
Default: 115200bps
[] GNSS DATA UPDATE RATE :
Max: 10Hz
Default: 1Hz
【Compatible With Multiple Platforms】
[] Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino Demos And User Manuals, Easier To Develop And Integrate, And Better Expansibility
[] Do not include Raspberry Pi and other controller boards
【Multi-GNSS Positioning Support】
[] Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS
【What's On Board】
【PINOUT DEFINITION】
[] VCC : Power supply (3.3V/5V)
[] GND : Gound
[] TX : Connect to MCU.RX (Signal direction: TX >> MCU.RX)
[] RX : Connect to MCU.TX (Signal direction: MCU.TX >> RX)
[] PPS : GPS status indicator
[] RST : Reset Pin
[] SDA : I2C data pin
[] SCL : I2C clock pin
【Outline Dimensions】
【Video】