• sales

    +86-0755-88291180

ESP32-S3-Relay-6CH-Program modification

Program Modification

  • In each example, there is a WS_Information.h file, please modify the file content to user information
  • Take the MAIN_ALL as an example


  • Open the WS_Information.h file


  • Change Waveshare-TL and waveshare to the name and password of the WiFi you want to connect to
  • If the Wi-Fi name to connect is Waveshare-WIFI and the password is 123456789, then modify them to the following


  • If you need to use Waveshare Cloud for relay control, you need to create a device on Waveshare Cloud first
  • Modify relevant data based on device details on the Waveshare Cloud


  • The modifications are as follows


TAG: Core1121 LoRa LR1121 HF LF SPI For Sub-GHz and 2.4GHz Milk V Duo 5inch USB Monitor Raspberry Pi WiFi6 Development Board EchoEar 1.85 inch Round TouchScreen 1.85inch QSPI LCD 360*360 CST816T ST77916 ESP32-P4 PICO Development Board with MIPI DSI 10.1-inch Display Desktop Trinket Raspberry Pi Buzzer Serial UART Bus Servo ST3020 TTL 25KG.CM Magnetic-Encoder High precision and Large torque Magnetic Encoder Servo Motor 120KG.CM 24V 360° RS485 High Precision And Large Torque Spotpear Raspberry-Pi-A7670E-GSM-GPRS-GNSS-LTE-Cat-1-2G-A-User-Guide Raspberry Pi 5 Official Original PCIe to M.2 NVMe SSD Raspberry Pi M.2 HAT+ Board For Pi5 WIFI Configuration ESP32 S3 Industrial Modbus RTU Dual Ethernet RJ45 To 8ch POE ETH Relay (C) PoE Power over Ethernet LuckFox Pico Mini 7.5 inch Passive NFC e-Paper BW Display 7.5inch E-ink Screen No Need Battery Wireless Powered Data Transfer ESP32-S3 AI 3.97-inch e-Paper Ink Screen 3.97inch Display AIoT Development Board Deepseek