• sales

    +86-0755-88291180

E-Paper Font Tutorial

E-Paper Font Tutorial

The following are examples of Chinese characters. We take the Raspberry Pi demo with a 2.13 V3 ink screen as an explanation, and other demos/fonts are similar.

Add the Chinese Font Library

Here is an example of adding font24CN.c.
Open the Zimo221.7z software and follow the steps below to configure the software.
Choose "Font selection for the text area."


Please select the corresponding font type according to the picture, and click "OK" after completing the configuration.
Font: Microsoft YaHei
Style: Regular
Size: 24
Character set: GB2312


Select "Other options".


Select the corresponding configuration according to the picture, and then click "OK".
Pattern extraction method: Horizontal extraction.
Keep a comma at the end of the reserved byte.
We will use C51 pattern extraction later, so the A51 format can be ignored.


①Input the Chinese characters here, and then press Ctrl + Enter.
②The preview of the inputted Chinese characters is displayed in Location 2.
③Click on the C51 format on the left side for the pattern extraction.
④The corresponding hexadecimal data will be generated afterward.


Open the corresponding file of the demo. The software I am using here is VS Code. Change the format from UTF-8 to GB2312.


To copy and modify the data that has just been extracted to the corresponding file according to the file format:


Open the "EPD_2in13_V3_test.c" file and replace "微雪电子" with "中文字库". Compile and run the demo, you will see that the previous "微雪电子" on the demo has been changed to "中文字库".


Add New Font Library

Here is an example of adding font48CN.c.
Open the Zimo221.7z software and follow the steps below to configure the software.
Choose "Font selection for the text area."


Please select the corresponding font type according to the picture, and click "OK" after completing the configuration.
Font: Microsoft YaHei
Style: Regular
Size: 48
Character set: GB2312


Select "Other options".


Select the corresponding configuration according to the picture, and click "OK" after completing the configuration.
Pattern extraction method: Horizontal extraction.
Keep a comma at the end of the reserved byte.
We will use C51 pattern extraction later, so the A51 format can be ignored.


①Input the Chinese characters here, and then press Ctrl + Enter.
②The preview of the inputted Chinese characters is displayed in Location 2.
③Click on the C51 format on the left side for the pattern extraction.
④The corresponding hexadecimal data will be generated afterward.


Create a new font48CN.c file in the corresponding file directory:


Follow the example of font24CN.c file and add the corresponding data to the font48CN.c file:


Modify font.h file data:



Open the file EPD_2in13_V3_test.c and modify it to the demo shown in the figure:


The display effect is shown below:


FAQ

Question:According to our configuration, the extracted font size is different from ours

 Answer:

Reason: Due to computer system compatibility issues.
Solution: Set the corresponding compatibility. Right-click on the software and select Properties.


Simply check the corresponding boxes


Useless

Added for the purpose of displaying the directory

TAG: TTL To CAN Raspberry Pi IR Array Thermal Imaging Camera Far infrared 80×62 Pixels 45/90 Degree FOV Pi5-Active-Cooler-C RISC-V Raspberry Pi Pico 1024×600 Arduino Thermal imaging camera ESP32 C3 1.44inch LCD Raspberry Pi 5 Fan Raspberry Pi Pico ST7789 Tang Nano Series FPGA FAQ ESP32 S3 Development Board 1.5 inch Round Rotary OLED TouchScreen Smart Knob Display 1.5inch Display 466x466 LVGL for Arduino ESP32-C6 WiFi 6 Development Board ESP32-C6-MINI-1Support WiFi6 Bluetooth5 Zigbee Thread Modbus-Protocol-Specification User Guide SpotPear ESP32 LVGL Raspberry Pi 5 Camera User Guide WiFi6 Development Board spotpear LCD1602 I2C Module PWM Adjustable backlight 3.3V/5V For Arduino/ Raspberry Pi/ Pico/ Jetson Nano/ ESP32 Raspberry Pi 12.3 inch HDMI LCD Captive TouchScreen Display 1920x720 For Jetson Series/Computer PC