• sales

    +86-0755-88291180

4inch-720x720-LCD User Guide

Features

  • 4inch round IPS screen with 720x720 hardware resolution.
  • 10-point capacitive touch with up to 6H hardness toughened glass panel.
  • Support optical bonding technology, better displaying effect.
  • Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
  • Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.

Parameters

ItemDescriptionUnit
Model4inch 720x720 LCD/
Size4.0Inch
Viewing Angle170Deg
Resolution720x720Pixels
Overall Size126.00(H)×126.00(V)×17.00(D)mm
Display Area101.52(H)×101.52(V)mm
Color Gamut60%NTSC
Maximum Brightness350cd/m²
Contrast1200:1/
Backlight AdjustmentButton dimming/
Refresh Rate60Hz
Display InterfaceStandard HDMI Interface/
Power Port5V Type-C Power Supply/
Power Consumption1.8Watt

Electrical Specifications

ParameterMinimumStandardMaximumUnitNote
Input Voltage4.755.005.25VNote 1
Input Current360360TBDmANote 2
Operating Temperature02560Note 3
Storage Temperature-102570Note 3

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current must be ≥360mA, otherwise, it will cause booting failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
•Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time. The display must work within the limited value range, otherwise, it may be damaged.

Onboard Interface


User Guide

Working with Raspberry Pi

Hardware Connection

  1. Connect the TOUCH interface of the LCD to the USB connector of the Raspberry Pi.
  2. Connect the LCD to the Raspberry Pi through the HDMI interface.


Software Setting

For Raspberry Pi OS/Ubuntu/Kali and Retropie system:

  • 1. Insert the TF card into the PC, download and use Raspberry Pi Imager to program the corresponding image.


  • 2. After programming the image, open the "config.txt" file located in the root directory of the TF card. Add the following code at the end of config.txt, save the file, and safely eject the TF card.
hdmi_group=2
hdmi_mode=87
hdmi_force_hotplug=1
hdmi_timings=720 0 40 40 200 720 0 24 4 12 0 0 0 78 0 59400000 0
  • 3. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds. After the system boots up, you should be able to enter the display interface and the LCD should touch normally.

Due to the round screen feature, it is recommended to use it with the Raspberry Pi remote login tutorial for boot setup.

Working with PC

Windows User Guide

  1. Connect the Touch interface of the LCD to the USB connector of the PC, and Windows will automatically recognize the touch function.
  2. Connect the LCD to the PC through the HDMI interface, and Windows will automatically recognize the touch function.
  • Note:
  • Some PCs do not support the plug-and-play functionality of the HDMI devices, generally, it works after rebooting the system.
  • If the power supply for the USB interface is not sufficient, the LCD display will blink, you can connect an external 5V 1A power adapter for the power port of the LCD to solve this issue.

Windows Touch Calibration

Take Windows 10 as an example:

  • 1. Enter the Windows settings of the system, type in the search bar and click "Calibrate the screen for pen or touch input" (as shown in the picture below):


  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:


  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)


Dimensions


Resource

3D Drawing

FAQ

Question: What are the approximate brightness levels corresponding to each of the 5 levels?

 Answer:
The 5 levels are 150cd/m², 250cd/m², 350cd/m², 420cd/m², and 500cd/m².


Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Email: services01@spotpear.com

TAG: Industrial-grade isolated 2-way RS485 hub repeater One RS485 TO Two RS485 Raspberry Pi Pico 2 RP2350-Zero Mini Board RP2350A ESP32-C6 Raspberry Pi 5 RTC charge configuration Raspberry Pi 7 inch QLED Quantum Dot Display 1024x600 Capacitive Touchscreen For Computer PC/Jetson/Game Raspberry Pi 5inch Display ESP32-S3 Development Board 4 inch LCD TouchScreen Display 480x480 RS485 /SHT20 /Relay For Arduino LVGL 86 TVbox 2.66inch e-Paper e-link Module 360x184 4-Color Red Yellow Black White For Arduino Raspberry Pi STM32 Jetson Tutorial Information Wiki Program Code User Guide SpotPear JETSON-NANO-MINI RS422 to CAN Jetson Orin Milk-V Duo S Extend Partition on SD Card or eMMC ESP32-S3 IR Infrared Thermal Imaging Camera B 45/90 80×62 ESP32-S3-WROOM Raspberry Pi LCD Capacitive TouchScreen Display HDMI 6.25inch 720x1560 ESP32 ST7789 configuration Milk V Duo Raspberry Pi Pico 2 RP2350 Core2350B Core Board PSRAM MPS2.5G Raspberry Pi 5 PCIe to NVME SSD And 2.5G Ethernet RJ45 HAT RTL8125 2280 2242 2230 Raspberry Pi 5 Official Original AI Kit Hailo8l 13Tops/26Tops PCIe M.2 HAT+ Board For Pi5 Raspberry Pi 1.5inch LCD