TOF LASER RANGE SENSOR (C)

Long Range | Short Blind Zone | Stable/Accurate/Sensitive | Indoor/Outdoor

Product Overview

The TOF Laser Range Sensor (C) is a TOF-based (time of flight) laser ranging sensor with embedded MCU and ranging algorithm, which is capable of offering up to 25m measuring range, and ±3cm accuracy. It supports UART or I2C communication bus, features longer measuring distance and higher light interference tolerance capability due to its ultra narrow FOV, suitable for either indoor or outdoor condition. And its ambient light tolerance is up to 100K LUX.

This sensor can be widely used in applications like common distance measuring, robot obstacle avoidance / route planning, as well as drone altitude setting / ceiling detection, and more...

Specifications

TYPICAL MEASURING RANGE	0.05 ~ 25.0m
TYPICAL MEASURING ACCURACY	0.05 ~ 25m ±3cm
WAVELENGTH	905nm
FIELD OF VIEW (FOV)	1° ~ 2°
COMMUNICATION INTERFACE	Default: UART (3.3V TTL signal level)
	I2C (cascading support, the slave address is 0x08+module ID)
	complementary I/O level output (distance parameter is not available for this mode)
BAUDRATE	UART: 4.8Kbps ~ 3000Kbps (921.6Kbps by default)
	I2C: up to 400Kbps
POWER SUPPLY	4.3 ~ 5.2V
POWER CONSUMPTION	250mW (UART active output, 5.0V power supply, 50mA current)
WEIGHT	7.7g
OPERATING TEMPERATURE	-10°C ~ 60°C
DIMENSIONS	22.7mm × 28mm × 13.6mm (L × W × H)

Cost Effective Solution

0.05 ~ 25m Long Range Low Cost Ranging Module
High Stability, High Accuracy, High Sensitivity Ranging

UART / I2C / IO Communication Support

UART Mode: Supports Active Query Output
I2C Mode: Up To 8x Cascades
I/O Mode: Unable To Output Distance Parameter

Applications

Hydraulic pile detection

Hardware Connection

Connecting With Raspberry Pi (Via I2C)

Connecting With Raspberry Pi (Via UART)

Connecting With Raspberry Pi (Via I/O Pins)

Outline Dimensions

[] TOF Laser Range Sensor (C)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com