• sales

    +86-0755-88291180

Raspberry Pi Zero WH (KIT F) User Guide

Instroduction

The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!

Note: this is the original Pi Zero V1.3, for the new version with built-in WiFi, please check

Difference among Zero, Zero W, and the Zero WH

The Raspberry Pi Zero is the basic version of the Raspberry Pi Zero series without WiFi and Bluetooth functions. The Raspberry Pi WH has a wireless card featuring WiFI and Bluetooth functions. The Raspberry Pi Zero WH version has a pre-soldered 40PIN pin header based on the Raspberry Pi W for easy use.

Specification Comparision

ItemRaspberry Pi ZeroRaspberry Pi Zero WRaspberry Pi Zero WH
SoC (System on Chip)BCM2835 (CPU, GPU DSP and SDRAM)
CPI (Central Processing Unit)ARM11 single core 700MHz
Memory512MB
USB 2.01x Micro USB port (supports USB HUB expansion)
Video outputSupports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 1200.
Audio outputHDMI (High Definition Multiple Audio/Video Interface)
Network AccessNoneWIFI and Bluetooth 4.1
Extended interface40
Power Input5v via MicroUSB or pin
Overall size65 × 30 x 5 mm
Operating SystemDebian GNU/Linux, Fedora, Arch Linux, RISC OS, etc.

Raspberry Pi Zero vs Raspberry Pi W

The Raspberry Pi W has a wireless card, which supports WiFi and Bluetooth.


1.3inch LCD HAT

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • IPS screen, wide viewing angle, better display
  • High definition in small size
  • 1x joystick, 3x pushbuttons, handy and useful

Specification

  • Driver: ST7789
  • Interface: SPI
  • Display color: RGB, 65K color
  • Resolution: 240x240
  • Backlight: LED
  • Operating voltage: 3.3V


UPS HAT (C)

Features

  • Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards
  • Li-po battery recharge chip, with dynamic path management, more stable power supply
  • Voltage boost chip, providing regulated 5V power output
  • I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: overcharge/discharge protection, over current protection, and short circuit protection, more safe and stable
  • Recharging indicator for monitoring the battery operating status
  • Comes with development resources and manual

Specifications

  • Output voltage:5V
  • Charger:5V
  • Control bus: I2C
  • Battery supported:803040 Li-po battery 1000mAh 3.7V
  • Dimensions:65 × 30mm
  • Mounting hole:3.0mm


General Tutorial Series

Resources

Documents

Software

FAQ

Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86  13434470212

Email: services01@spotpear.com

TAG: Raspberry Pi 5 Case 1.83inch LCD TouchScreen Display 240×280 NV3030B Arduino Raspberry Pi ESP32S3 Pico STM32 Argon Neo 5 ESP32 S3 Development Board 2.1 inch Round Rotary Knob LCD Smart Screen 2.1inch Display 480x480 LVGL for Arduino Raspberry Pi ESP32 C3 Mini Raspberry Pi 5 Active Cooler RP204 0.85inch LCD Screen Arduino MLX90640 Magnetic Encoder Servo Motor 85KG.CM 12V/24V 360° RS485 High Precision And Large Torque ESP32 S3 4.3inch LCD (B) 800x480 Captive TouchScreen Display Board LVGL with Sensor CAN I2C RS485 ESP32 C3 LCD 5inch ESP32 C3 ESP32-S3 GC9A01A ESP32 S3 LCD Camera Development Board 2 inch Display QMI8658 Sensor / Battery Port LVGL/HMI For Arduino RS485 to Ethernet D-Robotics RDK X3 MD Carrier Board For RDK X3 Module Horizon Sunrise Pi ARM Cortex-A53 5Tops 0.85inch Display