Raspberry Pi Pi-GPIO User Guide

Overview

This is an I/O expansion kit designed for Raspberry Pi, which provides 4 sets of 2x20 pinheaders, that means a handy way to "stack" multi different HATs together, and use them as a specific combination / project.

Features

Standard Raspberry Pi connectivity, directly pluggable OR through ribbon cable
4 sets of 2x20 pinheaders, connect multi HATs together
Clear and descriptive pin labels for easy use
Reserved jumper pads on the bottom side, pin connections are changeable by soldering, to avoid pin conflicts

Note: make sure there are no any pin conflicts between the HATs you want to use together before connecting.

Photo

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi RTC WatchDog HAT (B) Real time clock Onboard DS3231SN High Precision RTC Chip Serial UART Bus Servo TTL ST3235 30KG.CM Magnetic Encoder 360° High Precision And Large Torque Raspberry Pi Compute Module 4 CM4 PCIe to M.2 NVMe SSD RK3566 Raspberry Pi PICO Long-Range Communication DeepSeek XiaoZhi AI Voice Chat Robot BOX ESP32-S3 Development Board 1.28 inch Round LCD 1.28inch TouchScreen N16R8 spotpear Jetson Nano Heatsink Multi Protection ESP32 Portable Pendant Digital Input Sipeed NanoKVM-USB Finger-sized 4K USB KVM for Server/SBCs NVIDIA Jetson Orin Nano/NX PoE Mini Expansion Board Power over Ethernet RJ45 802.3af compliant Arduino 1.54inch OLED i7-1165G7 SC09 Serial UART Bus Servo Motor Switchable 2.3kg 300Angle RV1103 Computer USB Monitor Screen PC Monitor Screen Raspberry Pi Screen

Raspberry Pi Pi-GPIO User Guide

Overview

Features

Photo

To：

Email(support)

Raspberry Pi IO Board GPIO interface expansion board stacks up to 3 HATs at once