• sales

    +86-0755-88291180

7inch-Side-Monitor-B User Guide

Features

  • 7-inch IPS display with a hardware resolution of 1024x600.
  • All-metal CNC alloy case and the side monitor with a brightness of up to 500cd/m².
  • USB2.0 display signal, support power supply and display with one cable.
  • Support Windows 11/10/8.1/8/7.
  • Software configuration only is required for the first time and supports plug-and-play for subsequent usage.

Parameters

ItemDescriptionUnit
Model7inch Side Monitor/
Dimensions7.0Inch
Viewing Angle170Deg
Resolution1024x600Pixels
Overall Dimensions170.90(H)×106.60(V)×11.14(D)mm
Display Area154.60(H)×86.32(V)mm
Color Gamut58%NTSC
Default Brightness500cd/m²
Contrast800:1/
Refresh Rate60Hz
Power & Display InterfaceUSB2.0/
Default Power Consumption2.7Watt

Electrical Specification

ParameterMin. ValueStandard ValueMax. ValueUnitNote
Input Voltage4.75.005.25VNote 1
Input Current550600TBDmANote 2
Operating Temperature02560Note 3
Storage Temperature-102570Note 3
  • Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
  • Note 2: The input current must be ≥550mA, otherwise, it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
  • Note 3: Please do not store the display in a high-temperature and high-humidity storage environment for a long time. The display must work within the limited value range, otherwise, the display may be damaged.

Usage Tutorial

Hardware Connection

Method 1: USB Type-C Connection

Note: Please ensure the USB interface provides sufficient power!! It is recommended to use the USB interface on the board first.

Mthod 2: USB 4PIN Port Connection


Software Setting

Install Win USB Display Driver

  • 1. Download WinUSBDisplay driver program.
  • 2. Unzip it and run "WinUSBDisplay_Windows.exe".

① Please keep the default installation path "C:\Program Files\Win USB Display", and select "Next".

② Click on "Install".

③ NOTE! HERE SELECTS "NO" MANUALLY AND THEN CLICK ON ④ "FINISH".

④ Click to download and unzip config.ini, copy the "config.ini" file the default installation path "C:\Program Files\Win USB Display" in Step ①.

⑤ Now the software setting is finished, please restart the Windows system.

⑥ Restart to enter the system, wait for 30s, and then the 7-inch Side Monitor can be normally recognized and displays.
As shown in the figure below, enter "Display setting", set the side monitor as "Extended these displays", and select "1024 x 600 (Recommended)".

FAQ

Question:What is the brightness and power consumption of this product?

 Answer:

The brightness is 500cd/m², and the power consumption is 5V 0.6A.


Question:Why the resolution of the screen is 800x600 after rebooting? Isn't it 1024x600?

 Answer:

Please download and unzip config.ini. Copy "config.ini" to the default installation path "C:\Program Files\Win USB Display", reboot the system, and then the resolution is 1024x600.


Question:Why does my screen keep black? I have operated it following the steps on WiKi, why does it still fail to display?

 Answer:

1. Check Hardware Connection:
<1> Please ensure that the USB 2.0 interface provides sufficient power. Avoid using USB hubs or other extension devices whenever possible, as insufficient power supply may cause screen flickering or blackouts.
<2> It is recommended to connect the side monitor to the USB interface on the PC, or you can try to use the USB3.0 interface.
2. Check Software Setting:
<1> After rebooting the system, open "Display" setting, and click on "Detect" to check whether the side monitor is recognized.
<2> If it is recognized, please set the side monitor as "Extend these displays".

<3> If the side monitor is not recognized, please enter "Device Manager" to check whether the "MS USB Display" driver is correctly loaded.

<4> Enter "C:\Program Files", and check whether the "Win USB Display" folder exists;
<5> Open the file folder and select View -> Show -> Hidden items; enter "C:\Users\UserName\AppData\Roaming\WinUsbDisplay", package all ".log" files and send them to our support team for help.


Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86  13434470212

Email: services01@spotpear.com

TAG: Raspberry Pi Real time clock Raspberry Pi 5 PCIe to SATA Expansion Board with EEPROM HAT+ Raspberry Pi 3 LCD HAT Raspberry Pi Pico 2 RP2350 1.28 inch Round LCD TouchScreen Development Board 240x240 Display QMI8658 6-Axis $17.9 Pi5 Case Pi5 Raspberry Pi LCD display screen 1.3inch ST7789 with Game Button A DC-DC Step-Down Mini voltage Moudle Input 5~36V voltage Output 5V/3.3V 4A LuckFox Core3566 Milk V ESP32 UART USB Bus Servo ST RSBL Driver board For Raspberry PI Robot Raspberry Pi 4 USB Audio DDSM115 Direct Drive Servo Motor All-In-One Design Hub RS485 Motor Raspberry Pi MLX90641 ESP32 S3 Development Board 2.8 inch B LCD 2.8inch Display 480x640 TouchScreen QMI8658 Sensor / Battery Port LVGL/HMI For Arduino DeepSeek AI Voice Chat ESP32 S3 Development Board 1.8 inch AMOLED Display 368×448 1.8inch TouchScreen Programmable Watch QMI8658 /MIC /Audio /Battery TOF Time-Of-Flight Laser Range Sensor Radar Module UART / I2C Port Raspberry Pi 4 Camera 2.13inch e Paper HAT+ Black-White 250x122 E-Ink For Raspberry Pi /Jetson Nano /Sunrise X3 Pi /Pwnago X1201 Raspberry Pi 5 UPS Board Uninterruptible Power Supply For 18650-Li-Battery (NOT includ)