• sales

    +86-0755-88291180

GPIO Audio Module-Raspbian-Audio configuration tutorial

If your Module is GPIO18
Download audremap18.dtbo to your pi
sudo cp audremap18.dtbo /boot/overlays/
sudo nano /boot/config.txt
Add this code
dtoverlay=audremap18,pins_18_19

If your Module is GPIO19
Download audremap19.dtbo to your pi
sudo cp audremap19.dtbo /boot/overlays/
sudo nano /boot/config.txt

Add this code

dtoverlay=audremap19,pins_18_19

If your Module is GPIO18&GPIO19
sudo nano /boot/config.txt
Add this code
dtoverlay=audremap,pins_18_19

Then you need reboot
sudo reboot 
After rebooting , You need enable local audio

sudo raspi-config  Select System Options -> Audio -> 'headphone'

Then reboot again use sudo reboot 

Set audio voice max and play any music then you will hear sound


 

TAG: Raspberry Pi ST7789 Mini Uninterruptible Power Supply module Supports charging And Power output at the same time 5V 2.5A NanoKVM-Lite-Quick-Start Milk V Duo Raspberry Pi 3.97 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32 ESP32-P4-NANO Development Board RISC-V WiFi6 MIPI CSI Camera / 10.1 inch DSI Display / USB / RJ45 Ethernet / POE / Audio Buzzer R7FA4 PLUS B Development Board Based on R7FA4M1AB3CFM Compatible with Arduino UNO For R4 WiFi Luckfox Pico Zero RV1106G3 SD WiFi6 Audio eMMC-8G RAM-256MB Raspberry Pi 18.5 inch Type C/HDMI/4K Display Screen 3840×2160 Computer PC Phone Xbox/PS4/Switch 2.13Inch E-Ink Arduino 1.5inch LCD Arduino Thermal imaging 1.54inch OLED ESP32-C6 AI Voice Chat Robot For Xiaozhi 1.8 inch AMOLED Development Board 1.8inch TouchScreen Deepseek Metal Case Secondary Screen 4.2 inch e-Paper Display G Red/Yellow/Black/White 4.2inch E-link Screen For Arduino /Raspberry Pi /Jetson Nano /STM32 Jetson Orin NX Case ESP32-S3 LCD Serial Bus Servo