• sales

    +86-0755-88291180

Raspberry Pi 1.54inch LCD-Retropie-Audio configuration tutorial

Download audremap18.dtbo to your pi
sudo cp audremap18.dtbo /boot/overlays/
sudo nano /boot/config.txt
Add this code
dtoverlay=audremap18,pins_18_19
(audremap18.dtbo just enable gpio18 as pwm audio pin,
This Above code will not enable gpio19 as pwm audio pin,
gpio19 have configured as key START)

After rebooting , You need enable local audio

sudo raspi-config  Select System Options -> Audio -> 'headphone'

Go to retropie menu


Select  ->  AUDIO  ->  HEADPHONE

Then reboot again use sudo reboot 

Set audio voice max

Press key START enter retropie MAIN MENU


select SOUND SETTING
->SYSTEM VOLUME 100
->AUDI0 DEVICE   ->  HEADPHONE

->OMX PLAYER AUDIO DEVICE   -> LOCAL

Go back press key B
Then enter SOUND SETTING ->SYSTEM VOLUME again
You will see it is 97 or 77,You need set it 100 again|
After all settingthe VOLUME will became ok

TAG: SpotPear Computer USB Monitor Screen Wiki FT232RNL USB TO TTL Industrial UART Can For Raspberry Pi 5 Terminal Debug Jetson-nano-to-boot-the-system User Guide Jetson Nano Development Kit JETSON-NANO-DEV-KIT Replace For Jetson-Nano-Developer-Kit-B01 PC U Arduino-check-library-path ESP32-C3-Ornament-Trinket-LVGL-Astronaut-Clock-Watch-MINI-TV-1.69inch-Round-LCD-TouchScreen-ST7789-240x280 ESP32-S3 USB Dongle ESP32-S3 Development Board 4 inch LCD TouchScreen Display 480x480 RS485 /SHT20 /Relay For Arduino LVGL 86 TVbox Raspberry Pi 5 27W Rockchip UART To CAN Mini Milk-V Duo S eMMC version firmware burning Black 7inch Monitor LCD X1011 Raspberry Pi 5 PCIe to M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times 2280 2.66inch e-Paper e-link Module 360x184 4-Color Red Yellow Black White For Arduino Raspberry Pi STM32 Jetson Tutorial Information Wiki Program Code User Guide SpotPear pcb800099-v.9