• sales

    +86-0755-88291180

Luckfox Pico RV1103 【Tutorial】【USB RNDIS virtual network 】

The USB virtual network card of LuckFox Pico and LuckFox Pico Plus has a static IP address of 172.32.0.93. Before using it, you need to set up the RNDIS virtual network interface. However, for the LuckFox Pico Plus development board, no configuration is required when using the Ethernet port.


1】 Disable the network firewall:

Windows Security Center --> Firewall & Network Protection --> Turn off Firewall.



2】Configure the static IP for the RNDIS network card:

Open Settings -->; Advanced Network Settings -->; Change Adapter Options.



3】Set up a static IP:

The network card is usually named something like "Remote NDIS based Internet Sharing Device". Right-click and select Properties.


Double-click on Internet Protocol Version 4 (TCP/IPv4). Set the IPv4 address to 172.32.0.100 to avoid conflicts with other device addresses.



4】Verify the RNDIS static IP configuration:

In the command prompt on your local computer, enter the command "ping 172.32.0.100" to check the connectivity to the configured static IP.

TAG: Jetson Orin 4G/3G/2G expansion board GNSS GPS SIM7600G-H-M.2 Raspberry Pi 5 ABS Case LuckFox Pico plus Raspberry Pi Camera Case Retail electronic Tag VGA to TTL SpotPear 15.6 inch Dual LCD Computer PC Monitor Display Double Secondary Screen Type C Mini HDMI 1080P For Windows/MacOS ESP32 S3 Development Board 1.75 inch AMOLED Display TouchScreen SD slot 6-axis sensor Xiaozhi AI Deepseek Raspberry Pi 8.8 inch DSI MIPI Display LCD Capacitive TouchScreen 480x1920 Solar Power Manager Module (D) USB to UART SIM8230G M2 3G/4G/5G/GNSS/GPS Sub-6G PCIe M.2 Moudle For LTE-A/NSA/SA For DFOTA /VoLTE For SIMCOM Bus Servo Adapter A ESP32 ST7789 configuration Serial UART Bus Servo CF35-12 TTL 35KG.CM Magnetic-Encoder High precision and Large torque Serial Bus Servo LCC-14 ESP32 S3 AI 0.85inch Development Board 0.85 inch DeepSeek RGB surround light RISC-V