【Product Introduction】

[] 5.79inch E-Paper Raw Display, E-Ink Display, 792x272, Black/White, SPI Communication

【Product Details】

5.79″ E-Paper

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

【Features At A Glance】

[] No backlight, keeps displaying last content for a long time even when power down

[] Ultra low power consumption, basically power is only required for refreshing

[] Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

【Specifications】

OPERATING VOLTAGE	3.3V	DISPLAY COLOR	Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	4
OUTLINE DIMENSIONS	150.92 × 56.94 × 1.00mm	FULL REFRESH TIME	3.5s
DISPLAY SIZE	139.00 × 47.74mm	PARTIAL REFRESH TIME	0.8s
DOT PITCH	0.1755 × 0.1755mm	REFRESH POWER	<50mW
VIEWING ANGLE	>170°	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	792 × 272 pixels

Advantages Of EINK

[] E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

This Is Raw Display Without Driver Board

To Test And Compare This Raw Display Easily, It Is Recommended To Purchase The Following Solutions:

【Application Examples】
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

【Outline Dimensions】

[] 5.79inch-e-Paper

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com