Description

• ST-LINK/V2 is a development tool designed by ST STMicroelectronics to evaluate and develop STM8 series and STM32 series MCUs, integrating online simulation and downloading.
• STM8 series are connected with ST-LINK/V2 through SWIM interface
• STM32 series are connected with ST-LINK/V2 through JTAG/SWD interface.
• ST-LINK/V2 is connected to the PC via high-speed USB2.0.

Supported Software

• ST-LINK Utility v2.0 (and above)
• STVD Version 4.2.1 (and above)
• STVP Version 3.2.3 (and above)
• IAR EWARM Revision v6.20 (and above)
• IAR EWSTM8 Revision v1.30 (and above)
• KEIL RVMDK Revision v4.21 (and above)
• ATOLLIC
• TASKING

Supported Devices

• Support all STM8 series microcontrollers with SWIM interface
• Support all STM32 series MCUs with JTAG/SWD interface

Features

• Programming function: Can burn and write FLASH ROM, EEPROM, AFR, etc.
• Simulation function: support various debugging methods such as full-speed operation, single-step debugging, breakpoint debugging, etc., and you can view IO status, variable data, and so on.
• Simulation performance: using USB2.0 interface for simulation debugging, single-step debugging, breakpoint debugging, fast response speed!
• Programming performance: Use USB2.0 interface for SWIM / JTAG / SWD download, fast download speed!

Connection interface with target board

• ST-LINK/V2 specifies the SWIM standard interface and JTAG/SWD standard interface. 

1. ST-LINK/V2 × 1
2. USB type A to Mini-B cable × 1
3. 20-pin JTAG/SWD flat cable × 1
4. 4-pin SWIM cable × 1
5. 4-pin SWIM loose connector cable × 1