【Note】
[] Do not include 21700 Battery

[] Dangerous：Reverse connect the battery. Will cause Fire 
[] Before installing the battery, ensure that the direction of the battery is correct

【Overview】
[] Raspberry Pi uninterruptible power supply (UPS) module

[] Type-C bidirectional fast charging 5V6A high current

[] Supports simultaneous charging and discharging, onboard battery power meter chip

[] Provides a complete supporting information manual

【Product Features】
UPS HAT (E) is an uninterruptible power supply (UPS) expansion board designed for the Raspberry Pi series. It has an onboard battery charge meter chip, a fast charging chip, and a high-power buck chip to achieve greater power input and output. The module's working status can be monitored through the I2C interface.

[] Spring pin interface design, suitable for Raspberry Pi 5 / 4B / 3B+ motherboards

[] Onboard Type-C bidirectional fast charging interface, supports multiple charging input and output protocols such as PD3.0, and supports up to 40W power

[] Onboard dedicated battery power meter chip, supports reading battery voltage, current, power, remaining power and other parameters

[] Can communicate through the I2C interface, read Type-C interface input and output, battery status and other information, and detect the working status of the module in real time

[] The module adopts a four-cell 21700 lithium battery design with larger capacity and longer battery life

[] Onboard high-power buck chip, which can provide stable 5V 6A output

[] Onboard MCU chip management, supports power-on detection and startup function

[] Supports battery power icon display, easy to check module status

[] Provides a complete supporting manual
【Product parameters】

【Supports simultaneous charging and discharging for uninterrupted power supply】
[] Connecting to an external power source will simultaneously power the system and charge the lithium battery

[] Disconnecting the external power source will automatically switch to lithium battery power supply without affecting the normal operation of the system

The pictures are for display only. Please refer to the configuration list for specific configurations.
【72Wh high capacity, longer battery life】

[] The battery is upgraded to four 21700 lithium batteries, with a single battery capacity of 5000mAh

[] Onboard warning indicator light to facilitate checking whether the battery is connected reversely

Note: Do not connect the battery in reverse. When the warning light comes on, remove and reinstall immediately to avoid damaging the battery protection chip.

【Onboard USB interface】

[] The USB Type-C interface supports multiple input/output protocols, supports 5V, 9V, 12V, 15V, 20V voltage levels, and supports up to 40W of power. The USB Type-A interface outputs 5V power, which is convenient for powering other motherboards


This product does not include the Raspberry Pi 27W USB-C power supply shown in the picture. If necessary, please purchase it separately.
【Spring ejector design】

[] The spring ejector can be used to power the Raspberry Pi motherboard without occupying pin resources

[] Applicable to Raspberry Pi 5 / 4B / 3B+ and other motherboards

【Real-time detection of module working status】

[] Can communicate through the I2C interface to measure fast charging interface and battery voltage, current, power and other parameters.

[] When the voltage is too low, you can use the program to control the Raspberry Pi to save data and shut down to avoid sudden

【Battery power icon display supports power-on detection function】

[] Easily check the battery status in real time, automatically shut down when low power is low, and automatically start when a call comes in

【Product Size】

[] UPS HAT (E)  × 1  (Not include Battery)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com