Lichee Tang Nano1K FPGA User Guide

【Introduction】

Tang Nano 1K is a core board designed based on Gowin GW1NZ-LV1 FPGA chip. The board is equipped with RGB LCD interface and onboard USG-JTAG debugger, which make it convinent for users to use. User can use this for small digital logic design and experiment.

【Parameters】

item	Specs
chip	GW1NZ-LV1 FPGA
logic units(LUT4)	1152
Register(FF)	864
Block SRAM(bits)	72K
Number of B-SRAM	4
User flash(bits)	64K
Number of Pll	1
Number of I/O Bank	2

】Pinmap

【Informations】

【Addition】

For Fpga burning we require using this Programmer application. Because other version Programmer application may fail burning this board.
If you meet problems, please visit problems first, normally most problems will be solved after using this programmer Click me.

【Support】

Monday-Friday (9:30-6:30) Saturday (9:30-5:30) -China time
Email: services01@spotpear.com

TAG： 2.13Inch E-Ink Milk-V Duo RJ45 Raspberry Pi 5 Raspberry Pi 5 ABS Case Raspberry Pi 5 Speaker ESP32-S3 Development Board 1.47 inch LCD 1.47B Display 1.47inch Screen SD 172×320 RGB LED Raspberry Pi 5 Active Cooler Modbus RTU Relay 32CH Flash Firmware Flashing and Erasing User Guide Raspberry Pi Pico 2 RP2350 1.8 inch AMOLED Development Board Display 368×448 TouchScreen Programmable Watch QSPI ESP32 C3 LCD Raspberry Pi Compute Module 5 PoE BASE A IO Board RJ45 For CM5 Lite/eMMC X1011 Raspberry Pi 5 PCIe to M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times 2280 5inch Raspberry Pi Touch Display 2 5-inch Official Original 720x1280 LCD DSI/MIPI Screen RP2040 1.5inch LCD Sensor Jetson Nano Development Kit JETSON-NANO-DEV-KIT Replace For Jetson-Nano-Developer-Kit-B01 DeepSeek AI Voice Chat Robot ESP32 S3 Development Board 2.8 inch Display 2.8inch Screen DeepSeek AI Voice Chat ESP32 S3 Development Board 1.85 inch Round LCD 1.85inch Display QMI8658 /MIC /SD /MP3 Audio LVGL For Arduino JETSON-IO-BASE-A

Sipeed Lichee Tang Nano1K FPGA MINI Development Board GW1NZ-1

】Pinmap

【Informations】
【Addition】
【Support】