• sales

    +86-0755-88291180

Laser-450nm-5W User Guide

Introduction

Laser-450nm-5W is a high-precision laser module with a wavelength of 450nm, which belongs to the blue spectrum. This module features a high-precision laser head with a true output power of 4.5W. It adopts brand new imported glass lenses and laser diodes, with long lifespan and good stability


Features

  • Support engraving on a variety of materials, such as stainless steel, acrylic, wood boards, leaves, etc.
  • Spot compression technology, which enhances the energy density and focusing effect of laser beams
  • Adjustable lens with flexible focus adjustment according to working distance, making it easy to achieve the optimal spot size


Specifications

Laser-450nm-5W
Operating Voltage12V DCControl Signal Voltage2.5V~5V DC
Control ModePWM modulationResponse Frequency<2KHz
Spot ModeDotFocal Length50±1mm / Adjustable
Operating Temperature0℃~35℃Spot Size<40×400μm


Precautions

1. Confirm whether the operating voltage is within the specified voltage range as listed in Specifications before use.

2. Ensure that the module is used within the specified ambient temperature range (0℃~35℃).

3. Please ensure that the connections are correct and secure before use to avoid poor contact.

4. Do not touch the laser emission end during use to avoid injury.

5. The laser beam may heat up or ignite certain materials, please ensure that there are no flammable materials in the operating area.

6. The laser can cause harm to eyes and skin, please ensure the beam is not directly pointed at humans or animals.


Product Usage

1. The product uses a PWM modulation system, please follow the interface definition for correct wiring to avoid damage to the device.

2. Check if the power voltage meets the product requirements. After connecting the power, make sure the switch is turned off before proceeding to the next step.

3. The laser supports adjustable focal length design, which can flexibly adjust the spot size according to the working distance.

4. Hold the laser head and rotate it clockwise or counterclockwise gently to adjust the focal length.

5. During the adjustment process, observe the shape and size of the target spot until the optimal focusing effect is achieved.

6. It is recommended to perform the focusing operation at low power to avoid strong light from injuring the eyes.

Pinout Definition


    • Interface type: XH 2.54-3P

Resource

Demo


Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Email: services01@spotpear.com


TAG: ESP32-S3 1.28inch LCD Wiki Raspberry Pi Audio Allwinner H618 Raspberry Pi HQ Camera Official Original High Quality For M12 Lenses 12.3MP IMX477 Sensor JSON Command Meaning Raspberry Pi Compute Module 5 PoE BASE A IO Board RJ45 For CM5 Lite/eMMC Raspberry Pi 5 UPS HAT E 4-Port For 21700-Li-Battery (NOT includ) 5V6A Uninterruptible Power Supply Raspberry Pi 5 ESP32-S3 ETH Camera Development Board PoE RJ45 / OV2640 OV5640 Port / W5500 / Micro-SD Compatible With Raspberry Pi Pico Size Raspberry Pi Prism Raspberry Pi Pico 2 RP2350 2 inch LCD Capacitive TouchScreen Development Board 240x320 Display QMI8658 6-Axis /OV5640 Camera /SD /Battery Port ESP32-S3 LCD Raspberry Pi Serial Bus Servo Raspberry Pi DSI Scr Raspberry Pi Camera V2 Luckfox Pico Camera User Guide 0.85inch Display Raspberry Pi 64MP Camera