• sales

    +86-0755-88291180

DC-BUCK-Adapter User Guide

Overview

Design for 7.2V SC series serial bus servo.

Introduction

  • 7.2V buck regulator, suitable for the servos such as SC15 Servo and SC09 Servo.
  • Mini size, more space-saving, easy to integrate into the projects.
  • 9~36V wide voltage input for more flexible project power selection.
  • Simply connect it in series in the servo circuit to use.

Parameters

  • DC IN: 9~36V
  • DC OUT: 7.2V
  • Interface: 5264-3P
  • Peak Current: 3A
  • Mounting hole diameter: 2.70mm
  • Dimensions: 21.50*34.00mm

Application Scenarios


In the above figure, General Driver for Robots is powered by the XH2.54 interface of the UPS Module 3S. The DC BUCK Adapter (7.2V) is connected between the General Driver for Robots and the servo, and then 12.6V is lowered to 7.2V, providing more flexible power supply options for you.

Resource

TAG: HDMI to TTL USB To CAN FD Raspberry Pi CM4 Raspberry Pi 5 RTC Box Raspberry Pi DSI Raspberry Pi Lichee-Tang-Primer-20K-FPGA-Unboxing PI5 TTL UART To CAN Mini 4inch Round LCD HDMI Capacitive Touchscreen Display 720x720 For Raspberry Pi/Jetson Nano/mini PC NVIDIA Jetson Xavier NX AI 21TOPS Supercomputer Edge Computing eMMC-16GB RAM 8/16GB Gyroscope Raspberry Pi Compute Module 4 CM4 PCIe to M.2 NVMe SSD Raspberry Pi 18.5 inch Type C/HDMI/4K Display Screen 3840×2160 Computer PC Phone Xbox/PS4/Switch Raspberry Pi 5 inch DSI Display MIPI LCD (C) Capacitive TouchScreen 1024x600 ESP32-AI Series User Guide Raspberry pi Pico development board RP2040 Core A Based On Official RP2040 Dual Core Processor ESP32 ST7789 R7FA4 PLUS B Development Board Based on R7FA4M1AB3CFM Compatible with Arduino UNO For R4 WiFi NanoKVM-USB Quick Start