Google Chat:---
+86-0755-88291180
sales@spotpear.com
dragon_manager@163.com
tech-support@spotpear.com
zhoujie@spotpear.com
WhatsApp:13246739196
WhatsApp:13424403025
$79.99
Raspberry Pi 7.5 inch e-Paper HAT+ (E) E-Ink E6 Full color 1024x600 Screen Display For Arduino /STM32 /ESP32/Jetson Nano
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity


Version Options

| OPERATING VOLTAGE | Raw display: 3.3V | DISPLAY COLOR | E6 full color (E Ink Spectra 6) |
|---|---|---|---|
| with driver board: 3.3V / 5V | |||
| INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
| OUTLINE DIMENSIONS | Raw display: 170.20 × 111.20 × 0.86mm | FULL REFRESH TIME | 23s |
| Driver board: 65.00 × 30.50mm | |||
| DISPLAY SIZE | 163.84 × 97.20mm | REFRESH POWER | <0.2W |
| DOT PITCH | 0.160 × 0.162mm | STANDBY CURRENT | <1uA |
| RESOLUTION | 1024 × 600 pixels | VIEWING ANGLE | >170° |

The Resolution Is Up To 200ppi, Features A Wider Range Of Operating Temperature And Faster Screen Refresh Time. And It Is More Power-Saving, Aligning With ESG Trends For Energy Efficiency And Carbon Reduction

Using White, Red, Yellow, And Blue Charged Particles To Produce Six Primary Colors, And Employing Dithering Technology To Create Vivid And Saturated Full Color Images.

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

For Use With Controller Boards Like Raspberry Pi / Jetson Nano / Arduino /
ESP32 / STM32

| VCC | 3.3V / 5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| SCLK | SPI SCLK pin |
| CS_M | E-paper M area chip selection, low active |
| CS_S | E-paper S area chip selection, low active |
| DC | Data / Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output |
| PWR | Power control pin |