【Overview】

The ESP32-S3-Zero mini development board is based on the ESP32-S3FH4R2 dual-core processor and allows for the breakout of most pins within a small form factor. It utilizes a half-hole process and can be soldered onto custom boards.

【Product Features】

The product features of the ESP32-S3-Zero mini development board are as follows:

[] Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor, with a clock frequency of up to 240MHz.

[] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE).

[] Built-in 512KB SRAM and 384KB ROM, with stacked 4MB Flash and 2MB PSRAM.

[] Adopts a stamp-hole design with an onboard ceramic antenna, making it convenient for integration into user-designed baseboards.

[] Supports flexible clock settings, individual module power configurations, and enables low-power modes for a variety of scenarios.

[] Integrates a USB serial controller capable of full-speed communication and provides 34 GPIO pins that can be flexibly configured for peripheral functions.

[] Features 4x SPI, 2x I2C, 3x UART, 2x I2S, 2x ADC, and other peripheral functions.

【Version Options】

[] ESP32-S3-Zero and  ESP32-S3-Zero-Soldered

【Supports C/C++, MicroPython】

Comes with a comprehensive SDK and open-source documentation and tutorials, making it easy to get started and quickly integrate into applications.

[] C/C++ (Arduino, ESP-IDF): The official ESP-IDF development framework provides rich example programs. With tools like VScode or Eclipse, you can quickly set up a development environment or use Arduino directly for development.

[] MicroPython: MicroPython is a complete implementation of the Python 3 programming language that runs directly on embedded hardware such as Raspberry Pi Pico.

【Resource Overview】

1. ESP32-S3FH4R2 single-core processor with a maximum operating frequency of 240MHz.

2. USB Type-C interface.

3. ME6217C33M5G low dropout (LDO) regulator with a maximum current of 800mA.

4. WS2812 RGB LED for stunning lighting effects.

5. 2.4G ceramic antenna.

6. BOOT button for entering download mode by pressing it and then resetting.

7. RESET button for resetting the board.

8. ESP32-S3FH4R2 pin breakout.

【Pin Definitions】

【Product Showcase】

【Product Dimensions】

[] ESP32-S3-Zero × 1

[] ESP32-S3-Zero-Soldered x 1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com