• sales

    +86-0755-88291180

M2-SATA-5P User Guide

Introduction

JMB575 control chip, M.2 NGFF SATA to 5-port SATA3 expander.

Parameters

  • Supported hard drive: HDD and Solid State Drive with SATA protocol compatible
  • Control chip: JMB575
  • Transfer interface: SATA female port × 5, M.2 B-key SATA male port × 1
  • Transfer speed: SATA3: 6Gbps
  • Operating system: Windows / Linux
  • Dimensions: 80.0 × 22.0mm

Note

  1. The module is for SATA expansion, only the SATA interface on the M.2 B/M KEY slot that supports the SATA PM function can be used.
  2. There are components at the bottom of the module, check whether the height of the seat is sufficient before use.

Dimensions


TAG: Raspberry-Pi-GPIO-Audio-amplification-PWM-Sound-Card-Speaker-Buzzer Raspberry Pi CM5 to Pi 5 Expansion Board With USB microphone & Audio Port Raspberry Pi 5 PCIe to M.2 NVME SSD And Gigabit Ethernet RJ45 HAT RTL8111H M_KEY For 2230/2242/2260/2280 USB CAN Analyzer JETSON-IO-BASE-A Install Espressif IDF Plugin Tutorial User Guide Raspberry Pi Pico 10.1inch DVI LCD Milk-V Duo S eMMC version firmware burning VGA to TTL Raspberry Pi Pico 2 W RP2350 Pico2W ARM Cortex-M33 And RISC-V Hazard3 Wi-Fi4 Bluetooth5.2 CYW43439 Raspberry Pi display WiFi6 Development Board Raspberry Pi Pico 2 RP2350 Pico2 ARM Cortex-M33 And RISC-V Hazard3 520KByte 4MByte QSPI Flash SpotPear 4.26inch-e-Paper Raspberry Pi 3.97 inch e-Paper link BW 800x480 For Arduino / Jetson / STM32 /ESP32 Raspberry Pi 5 Sound Jetson Nano Raspberry Pi 0.96inch RGB OLED ESP32-S3 Development Board 1.47 inch LCD Screen Display 172x320 SD-Port LVGL USB