• sales

    +86-0755-88291180

RGB-5050-5V-IP65-60D-1M User Guide

   Specifications

  • LED light source: 5050 light beads
  • IC model: WS2812B
  • Voltage: 5V
  • Color: RGB
  • Circuit board: PCB width 10mm
  • Beam angle: 120°
  • Working power: 0.3W / piece
  • Length of each roll: 1 m / roll
  • Working temperature: -25~80℃
  • Gray level: 256 adjustable gray levels (per color)
  • Specifications: 60 lights/m
  • Protection class: IP65
  • Outlet mode: 3PIN terminal head power cord + 2PIN supplementary voltage power cord
  • Installation method: 3M glue on the back of the light strip
  • Terminal wires: red wire (5V positive), white wire (5V negative), green wire (DATA signal wire)



Product details




Note: When cutting, it should be cut from the cutting point to avoid or reduce unnecessary waste and damage


Strong flexibility, can be bent at will

High light transmittance flexible insulating material, anti-leakage, can be bent into any shape


IP65 degree of protection

The lamp beads are covered with high transparent resin, which can prevent a small amount of water splash


Installation method



Physical demonstration



Product display



Outline Dimensions




TAG: Luckfox Pico Pro Robotic Arm Control DeepSeek XiaoZhi AI Voice Chat Robot BOX ESP32-S3 Development Board 3.5 inch LCD N16R8 Touchscreen Display 6-Axis /Camera /SD Raspberry Pi 5 Gen3 Arduino Thermal imaging camera Raspberry Pi 18.5inch FHD LCD 1920x1080 Capacitive TouchScreen Display For Raspberry Pi/Jetson Nano/ Raspberry Pi ESP32-P4 Smart 86 TV Box Development Board 4 inch 720x720 Display TouchScreen RS485 Relay Camera RJ45 ETH ESP32 Raspberry Pi ADXL356BEZ SpotPear DDSM315 Direct Drive Servo Motor All-In-One Design Hub RS485 Motor RV1103 SC3336 Sipeed FPGA Tang Primer 20K Dock/Lite 128M DDR3 Development Board GW2A-LV18PG256C8/I7 ESP32-S3 GC9A01A Raspberry Pi IR Array Thermal Imaging Camera Far infrared 80×62 Pixels 45/90 Degree FOV MPS2280D Raspberry Pi 5 PCIe to M.2 NVMe Dual SSD Adapter Board HAT Pi5 Double 2280 MEGA2560 R3 Program