• sales

    +86-0755-88291180

Raspberry Pi CM4 to CM3 Adapter User Guide

Overview

Since the Raspberry Pi Compute Module 3 (CM3) module is in short supply, the CM4 to CM3 adapter is designed to convert CM4 module to CM3 interface.

This adapter board converts the latest Raspberry Pi Compute Module 4 (CM4) to CM3 interface, allowing CM4 to adapt to the old CM3+/CM3/CM3L series baseboard. Also Support to use CM4 with Geekworm 12mm aluminum alloy heatsink C235.

When install the CM4 module into CM4 to CM3 adapter board, please pay attention to the CM4 install directions.

Note:

  1. Make sure that the CM4 module is installed on the expansion board correctly before power on.
  2. Please pay attention to the CM4 install directions.
  3. The Raspberry Pi Compute Module 4 or heatsink is not included in the packing list.


TAG: Zero LCD HAT (A) user guide RP2040-Keyboard-3 Sipeed Tang Primer 25K GW5A RISCV FPGA Development Board Dock SDRAM GW5A-LV25MG121 Retro Game linux Raspberry Pi 3D Display Raspberry Pi 7.5 inch e-Paper link (H) RYBW 800x480 For Arduino / Jetson Nano / STM32 Supports 6V~24V Solar Panel RP204 0.85inch LCD Type-C Power Adapter and Audio Speaker spotpear Raspberry Pi 10.1 inch DSI LCD TouchScreen Display 800x1280 Also For RK3576/RK3506/ESP32-P4 ESP32 1.54 inch E-Paper Smart Watch display Screen 200x200 Ultra-low power For Arduino/Micropython/RTOS For Watchy ESP32 S3 R8 MP3 Board 2.8inch LCD TouchScreen Display Speaker/SD-Card/Battery/QMI8658-6-Axis-Sensor ESP32 S3 3.5 inch LCD Development Board 480x320 Display Capacitive TouchScreen Tablet /MP3 Video /Weather Clock LVGL For Arduino SpotPear Raspberry Pi 3.5 inch LCD G Display Resistive TouchScreen 60fps ST7796 320x480 Also For Arduino/Pico2/ESP32/RP2040/RP2350 Raspberry Pi Pico 2 RP2350 GEEK 1.14 inch LCD 240x135 65K SWD/UART/I2C For OpenOCD/CMSIS-DAP ESP32 S3 Development Board 1.46 inch Round LCD 1.46inch Display 412x412 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino RS485 to RJ45 ESP32 C3 1.44inch LCD