Raspberry Pi SIM7600G H 4G HAT , LTE CAT4

Raspberry Pi SIM7600G H 4G HAT , LTE CAT4

$74.89

Brand：Spotpear

SKU：0102008

Date：2020-08-01 10:08

Part Number：

SIM7600G-H-4G-HAT

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

Features

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Communications Specifications

	LTE	WCDMA / TD-SCDMA / CDMA 2000	EDGE	GSM/GPRS
Band	SIM7600A-H: LTE-FDD B2/B4/B12	SIM7600A-H: UMTS/HSPA+ B2/B5	Not available
	SIM7600E-H: LTE-FDD B1/B3/B5/B7/B8/B20 LTE-TDD B38/B40/B41	SIM7600E-H: UMTS/HSPA+ B1/B5/B8	GSM/GPRS/EDGE 900/1800 MHz
	SIM7600CE-T: LTE-TDD B38/B39/B40/B41 LTE-FDD B1/B3/B8	SIM7600CE-T: UMTS/HSDPA/HSPA+ B1/B8 TD-SCDMA B34/B39 CDMA 1X/EVDO BC0	GSM/GPRS/EDGE 900/1800 MHz
	SIM7600G-H: LTE-TDD B34/B38/B39/B40/B41 LTE-FDD B1/B2/B3/B4/B5/B7/B8 /B12/B13/B18/B19/B20/B25/B26/B28/B66	SIM7600G-H: UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19	SIM7600G-H: GSM/GPRS/EDGE 850/900/1800/1900MH
Generation	4G	3G	2.5G	2G
Emitting power	0.25W		0.5W@EGSM900 0.4W@DCS1800	2W@GSM900 1W@DCS1800
Data Speed	LTE CAT 4 Uplink≤50 Mbps Downlink≤150 Mbps	UMTS Uplink≤384Kbps Downlink≤384Kbps	EDGE Uplink≤236.8kbps Downlink≤236.8kbps	GPRS Uplink≤85.6kbps Downlink≤85.6kbps
Data Speed		HSPA+ Uplink≤5.76Mbps Downlink≤42Mbps
SIM Card	Normal SIM (Not Included)

GNSS Specifications

Receiver type
- 16-channel
- C/A code
Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
Accuracy
- Position: <2.5m CEP

SMS and Audio Specifications

SMS
- Supported types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
Audio feature
- Supports echo cancellation
- Supports noise reduction

Other Specifications

Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C
Dimension: 56.21mm x 65.15mm

What's on Board

SIM7600G-H
CP2102 USB to UART converter
NAU8810 audio decoder
TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
MP2128DT power chip
MP1482 power chip
Raspberry Pi GPIO header: for connecting with Raspberry Pi
SIM7600 control interface: for connecting with host boards like Arduino/STM32
SIM card slot: supports 1.8V/3V SIM card
TF card slot: allows file/SMS/... storage
3.5mm earphone/mic jack
USB interface: for testing AT Commands, getting GPS positioning data, etc.
USB to UART interface: for serial debugging, or login to Raspberry Pi
MAIN antenna connector
AUX antenna connector
GNSS antenna connector
Power switch
Network status indicator
Power indicator
Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART