Introduction

• The NanoPi NEO Air uses an Allwinner H3 Quad Core A7 processor at 1.2GHz.Its pins are compatible with the NanoPi NEO(V 1.2)and its 24-pin header is compatible with Raspberry Pi's GPIO pin headers.
• The NanoPi NEO AIR features 512MB of 16bit wide DDR3 RAM,8GB eMMC and one MicroSD slot. It has WiFi & Bluetoothand DVP camera interface(YUV422). The DVP camera interface cansupport friendlyarm's 5M-pixel camera module
• It has enhanced power circuit design and better heat dissipation.

   Layout & Interface

   Hardware Spec

• CPU
• Model: Allwinner H3
• Number of Cores: Quad-core
• Frequency: 4*Cortex-A7 Up to 1.2GHz
• Memory RAM: 512MB
• Storage 
• eMMC: 8GB/32GB
• MicroSD Slot: MicroSD*1 for external storage up to 128GB
• Connectivity
• WiFi: 802.11b/g/n
• Bluetooth: 4.0 dual mode
• Antenna*1: IPX Connector
• Audio
• Audio input/output Port: 2.0mm pitch 4-pin header
• Video
• DVP Camera: 0.5mm pitch 24 pin FPC seat
• USB
• MicroUSB*1: MicroUSB 2.0, OTG & Power In, Type A
• USB Host: 2.54mm pin*2
• Pin-header
• GPIO1: 2.54mm spacing 24pin,It includes UART,SPI,I2C,GPIO
• GPIO2: 2.54mm spacing 12pin,It includes USBx2,IR,SPDIF,I2S
• Serial Debug Port: 2.54mm pitch 4-pin-header
• Audio input/output Port: 2.0mm pitch 4-pin header
• LED
• Power LED(Red)*1
• STAT LED(Green)*1
• Others
• Working Temperature: -20℃ to 70℃
• Power
• DC 5V/2A

   Software Features

• OS Support
• - FriendlyCore 16.04(based on UbuntuCore-16.04)
• - FriendlyCore Focal (Base on Ubuntu 20.04)
• - FriendlyWrt 18.06(32-bit)
• - Armbian
• - DietPi
• - Lakka
• - Kali
• Kernel version
• Linux-4.14-LTS
• U-boot-2017.11
• uboot
• supports fastboot to update uboot
• FriendlyCore
• rpi-monitor: check system status and information
• npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login, and enabling/disabling i2c, spi, serial and PWM
• NetworkManager: manage network
• software utility: RPi.GPIO_NP to access GPIO pins
• welcome window with basic system information and status
• auto-login with user account "pi" with access to npi-config
• on first system boot file system will be automatically extended
• supports file system auto check and repair on system boot
• supports FriendlyElec's NanoHat-PCM5102A
• supports FriendlyElec's Matrix_-_2.8_SPI_Key_TFT
• supports file transfer with Bluetooth
• supports FriendlyElec BakeBit modules
• supports dynamic frequency scaling and voltage regulation
• Ubuntu OLED
• supports FriendlyElec's OLED module
• Eflasher
• supports flashing OS image to eMMC
• Debian for NAS Dock
• supports FriendlyElec’s NAS Dock
• pre-installed OpenMediaVault

   Outline Dimensions

• PCB: 6 Layer
• Dimension: 40*40mm
• Weight: 7.5g(WITHOUT Pin-headers)

   Product Assembly

   Product picture

   Video

Bundle: NanoPi NEO Air

1. NanoPi NEO Air Board x1
2. Antenna x1

Bundle: NanoPi NEO Air With Heatsink

1. NanoPi NEO Air Board x1
2. Antenna x1
3. Heatsink x1

Bundle: NanoPi NEO Air Kit A

1. NanoPi NEO Air Board x1
2. Antenna x1
3. Heatsink x1
4. Micro USB Cable x1

Bundle: NanoPi NEO Air Kit B

1. KIT A x1
2. Card Reader and USB Power head x1
3. USB2UART Module x1
4. Transparent case x1

Bundle: NanoPi NEO Air Kit C

1. KIT A x1
2. Card Reader and USB Power head x1
3. USB2UART Module x1
4. Transparent case x1
5. CAM500B Camera x1

Bundle: NanoPi NEO Air Kit D

1. KIT A x1
2. Card Reader and USB Power head x1
3. USB2UART Module x1
4. Transparent case x1
5. CAM500B Camera x1
6. UNO Dock + BakeBit sensor kit