Overview

Introduction

PCIe to 4-ch PCIe FFC adapter board designed for Raspberry Pi 5, PCIe 2.0 Version (PCIe Gen2)

Features

PCI-E×1 only supports Gen2
Only supports PI5B
Onboard working indicator, PWR stays on when powered on
Flexible combination, easy stacking of multiple PCIe HAT modules

Usage Instructions

Hardware Connection

Pay attention to the direction of the cable, and the connection is shown in the figure:

Boot PCIe

1. Enable PCIE interface

PI5B defaults to enabling the PCIE interface.
If it fails to boot, add the following to /boot/firmware/config.txt:
dtparam=pciex1

2. The module only supports PCIE Gen2 x1

Resources

FAQ

Question: Does it support Hailo-8?

Answer:

It's okay to use, but the rate can only support GEN2 mode, and the other channel also consumes the rate, which will result in being unable to fully utilize the performance

Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Email: services01@spotpear.com

TAG： Raspberry Pi 5 Gen3 SpotPear UART To CAN ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino Raspberry Pi DSI 800×480 Raspberry Pi 64MP Camera ST servo driver Raspberry Pi Thermal imaging camera Raspberry Pi 3.97 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32 ESP32-S3 Development Board 1.47 inch LCD 1.47B Display 1.47inch Screen SD 172×320 RGB LED Raspberry Pi CM5 Official Original IO Board a Base Development Platform Compute Module 5 IO Board LuckFox Pico Camera Raspberry Pi OpenWrt Tutorial 2 Information EG25-G Mini PCIe SIMCom Original 4G LTE Cat-4 Module Global Coverage GNSS PCI Express Mini Card User Guide A7670E LTE Cat-1 HAT for Raspberry Pi Multi Band 2G GSM / GPRS LBS IR Thermal Imaging Camera Raspberry Pi 5 RTC charge Raspberry Pi PICO LoRa-HF

PCIe-TO-4-CH-PCIe-HAT User Giode