• sales

    +86-0755-88291180

Raspberry Pi 1.54inch LCD Bookworm-Desktop Display and Touch

Step 1】Test Environment
Official image version
2024-03-12-raspios-bookworm-armhf.im

Pi' Version :  4B、5B

HAT :  spotpear rpi-1.54inch-lcd

Step 2】Configure SPI display:

Copy spotpear_240x320_st7789.dtbo to /boot/overlays/ directory

sudo cp spotpear_240x240_st7789_lcd1inch54.dtbo /boot/overlays/

Edit config.txt configuration file】

sudo nano /boot/firmware/config.txt

Disable KMS】

#dtoverlay=vc4-kms-v3d

#max_framebuffers=2

Add the following configuration at the end of the file】

dtparam=spi=on

dtoverlay=spotpear_240x240_st7789_lcd1inch54

hdmi_force_hotplug=1

max_usb_current=1

hdmi_group=2

hdmi_mode=87

hdmi_cvt 480 480 60 6 0 0 0

hdmi_drive=2

display_rotate=0


Download, compile and install fbcp】

sudo apt update

sudo apt-get install git -y

sudo git clone https://github.com/tasanakorn/rpi-fbcp.git

cd ./rpi-fbcp/

sudo mkdir -m 777 ./build

cd ./build/

sudo apt install libraspberrypi-dev -y

sudo apt-get install cmake -y

sudo cmake ..

sudo make

sudo install fbcp /usr/local/bin/fbcp


Set auto-start startx and fbcp】

sudo nano ~/.bash_profile


Note: If there is no .bash_profile file, create one yourself

Add the following code to the bottom of the .bash_profile file】

if [ "$(cat /proc/device-tree/model | cut -d ' ' -f 3)" = "5" ]; then

# Raspberry Pi 5B configuration

export FRAMEBUFFER=/dev/fb1

startx 2> /tmp/xorg_errors

else

# Non-Raspberry Pi 5B configuration

export FRAMEBUFFER=/dev/fb0

sleep 20

fbcp &

startx 2> /tmp/xorg_errors

fi


Set CLI automatic login】

sudo raspi-config nonint do_boot_behaviour B2

Noto: This command has optional parameters

B1 - Boot to console, requiring login

B2 - Boot to console, logging in automatically

B3 - Boot to desktop, requiring login

B4 - Boot to desktop, logging in automatically

Note: Make sure the username of the Raspberry Pi is pi, otherwise it will not log in automatically


Switch to X11】

sudo raspi-config nonint do_wayland W1

Note: This command has optional parameters

W1 - Use the X11 backend

W2 - Use the Wayland backend


The above configuration will take effect after restart】

sudo reboot

Note: After setting all the above configurations, the system will become longer during each restart, and SSH also needs to wait for a while to enter;

Step 3】Configure Touch:

Install the calibrator software

sudo apt-get install xserver-xorg-input-evdev

sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf

sudo apt-get install xinput-calibrator

Edit the 99-calibration.conf configuration file

sudo nano /usr/share/X11/xorg.conf.d/99-calibration.conf

Section "InputClass"

        Identifier      "calibration"

        MatchProduct    "ADS7846 Touchscreen"

        Option  "Calibration"   "326 3536 3509 256"

        Option  "SwapAxes"      "1"

        Option "EmulateThirdButton" "1"

        Option "EmulateThirdButtonTimeout" "1000"

        Option "EmulateThirdButtonMoveThreshold" "300"

EndSection

The above configuration will take effect after restart】  

sudo reboot

TAG: Argon ONE V3 Case with FAN IR For Raspberry Pi 5 Raspberry Pi IR Thermal Imaging Camera Milk-V Duo S 512MB SG2000 RISC-V ESP32 S3 LCD Development Board 1.3 inch Display 1.3inch Screen ST7789 240x240 Mini TV SD-Port QST QMI8658 Gyro Sensor LVGL For Arduino ESP32 S3 R8 MP3 Board 2.8inch LCD TouchScreen Display Speaker/SD-Card/Battery/QMI8658-6-Axis-Sensor TTL To CAN Raspberry Pi 5 5V5A Power Raspberry Pi 4B UGV Rover PT Kit AI OpenCV Robot Car MediaPipe For Jetson Orin Raspberry Pi 5 Power Raspberry Pi 14 inch LCD 2K HDMI /Type C Display Capacitive TouchScreen 2160x1440 For Jetson Nano/mini Computer PC E-Paper Raspberry Pi 5 PCIe USB HUB 3.2 Gen1 HAT+ High Speed Pi5 Python HTTP Request Communication JETSON NANO MINI Expansion Board Pi5 JETSON NANO MINI ESP32 ST7789 tutorial ESP32-S3 A7670E 4G development board supports LTE Cat-1/2G/GNSS positioning/WiFi/Bluetooth Milk V