RP2350 Microcontroller Development BoardDesigned based on Raspberry Pi RP2350
Version selection
Product Features
This product is a low-cost, high-performance microcontroller development board designed by Spotpear. In a small form factor, it is equipped with a 1.28-inch LCD round screen, a lithium battery charging chip, and six-axis sensors (three-axis acceleration and three-axis gyroscope) and other peripherals, and all GPIO and Debug interfaces are brought out to facilitate development and embedding applications into products.
The main functional features are:
- RP2350 microcontroller chip designed with Raspberry Pi
- Unique dual-core, dual-architecture, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, running at up to 150MHz Flexible clock
- Built-in 520KB SRAM and 4MB on-chip Flash
- Adopt Type-C interface, keep up with the trend of the times, no need to worry about plugging in the right or wrong direction
- Onboard 1.28-inch 240 × 240 resolution, 65K color IPS LCD display, can clearly display color images
- Onboard lithium battery charging and discharging interface, which is convenient for mobile use
- All GPIOs are led out through 1.27mm pitch female headers (30 in total, some pins are already connected to the internal circuit, please pay attention when multiplexing)
- USB1.1 host and device support
- Supports low power sleep and hibernation modes
- Drag-and-drop program downloading via USB recognition as mass storage
- 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 24 controllable PWM channels
- Temperature Sensor
- 12 Programmable I/O (PIO) state machines for custom peripheral support
Optional metal Case versionCNC metal shell helps to quickly dissipate heat, and the frosted surface is more textured
Support C/C++, MicroPythonComplete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications
Unique dual-core, dual-architectureThe RP2350's unique dual-core, dual-architecture capability allows users to switch between a pair of industry-standard Arm Cortex-M33 cores and a pair of open hardware Hazard3 cores, giving developers the opportunity to experiment with the RISC-V architecture in a stable, well-supported environment.
30 multi-function GPIO pinsSupports configuration pin function, which can be easily and flexibly developed and integrated
Resource Brief
1. USB Type-C port Can be used to download programs and supports USB1.1 host and slave devices
| 5. 1.27mm spacing pin header Bring out all GPIO and Debug interfaces
|
2. ETA6098 High-efficiency lithium battery charging chip
| 6. P25Q32SH-UXH-IR 4MB NOR-Flash
|
3. Battery interface MX1.25 connector, can be used to connect 3.7V lithium battery, supports charging and discharging
| 7. RP2350 Dual Core ARM Cortex-M33 Dual Core Hazard3 RISC-V @150MHz
|
4. QMI8658 Six-axis inertial measurement unit (IMU), including a 3-axis gyroscope and a 3-axis accelerometer
| 8. RESET button Reset button
|
| 9. BOOT button Press during reset to enter download mode
|
Resource Brief
[] RP2350-LCD-1.28(No-Touch)
[] P2350-LCD-1.28-B(No-Touch+Case)
To:
Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!
Email(support)
services01@spotpear.com