【Note】

[] RP2040-PiZero is Not Raspberry Pi Zero, Cann’t run Linux, It is a Raspberry Pi PICO RP2040 board

[] The GamePi13 Cann’t be used alone. You need to buy a Raspberry Pi Zero or RP2040-PiZero

【Overview】

[] GamePi13 And RP2040-PiZero For creating Raspberry Pi PICO RP2040 projects like gaming consoles and digital albums. [] GamePi13 And Raspberry Pi Zero 2W can run Linux. It can run various game simulators, play videos, etc.

【Product Parameters】

【GamePi13】

[] Operating voltage: 3.3V

[] Interface: SPI

[] LCD type: TFT

[] Display controller: ST7789V

[] Resolution: 240 * 240

[] Support 65K color display

[] IPS wide viewing angle

[] PWM audio output: buzzer and headphone port

[] 12 buttons

【RP2040-PiZero board】 (optional, not included by default)

[] Using Raspberry Pi's self-designed RP2040 microcontroller chip

[] Dual-core ARM Cortex M0+ processor, running at up to 133MHz flexible clock

[] Built-in 264KB SRAM and 16MB on-chip Flash

[] Onboard DVI interface, can drive most HDMI screens (need to be compatible with DVI interface)

[] Onboard PIO-USB interface, can be used as USB host and slave

[] Onboard Micro SD card holder, can read and write Micro SD card

[] Onboard lithium battery charging and discharging interface, which is conducive to mobile scene use

[] USB1.1 host and device support

[] Can be identified as a large-capacity storage through USB for drag-and-drop download of programs

[] Support low-power sleep and hibernation modes

[] 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC and 16 controllable PWM channels

[] Accurate on-chip clocks and timers

[] Temperature sensor

[] On-chip accelerated floating-point library

[] 8 programmable I/O (PIO) state machines for custom peripheral support

【Raspberry Pi Zero 2W】(optional, not included by default)

[] Broadcom BCM2710A1, quad-core 64-bit SoC (Arm Cortex-A53 @ 1GHz)

[] 512MB LPDDR2 SDRAM

[] 2.4GHz IEEE 802.11b/g/n wireless LAN, Bluetooth 4.2, BLE

[] Onboard 1 Micro USB 2.0 interface with OTG

[] Onboard Raspberry Pi 40 Pin GPIO interface solder pads, suitable for Raspberry Pi series expansion boards

[] MicroSD card slot

[] Mini HDMI output interface

[] Composite video interface solder pads, and reset interface solder pads

[] CSI-2 camera interface

[] H.264, MPEG-4 encoding (1080p30); H.264 decoding (1080p30)

[] Support OpenGL ES 1.1, 2.0 Graphics

【Product display】

[] Connect RP2040-PiZero board

[] Connect the RPi Zero 2W board

【Resource Overview】

【Product size】

[] GamePi13 (Only display, Cann't be used alone)

[] GamePi13-RP2040-PiZero (Display + RP2040 Board)

[] GamePi13-RPi-Zero-2W (Display + RPi Zero 2W Board)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com