【Overview】

[] PCIe to M.2 E KEY expansion board

[] Supports PoE Ethernet power supply

[] Applicable to Raspberry Pi 5, supports NGFF (M.2 E Key) wireless network card

Parameter

PoE power input	37V ~ 57V DC input
Power Output	GPIO Header：5V 4.5A (MAX)
	2P Pin Header：12V 2A (MAX)
Product size	56.0 × 85.0 (mm)
Web Standards	IEEE 802.3af/at PoE
PCIe interface type	M.2 E Key

【Network card support type】

【Support various wireless network cards】

[] Support the following modules, more compatible modules are expected soon

【SMA female antenna interface】

[] Support USB Bluetooth connection
[] Through the USB adapter board, the Bluetooth signal can be input to the Raspberry Pi
[] The USB Bluetooth connection function is only available after connecting to the wireless network card module

* for reference only, please refer to the Package Content for the detailed part list.

【For Raspberry Pi 5】

[] Can be connected to PI5 via 16-pin cable, based on Raspberry Pi 40-pin GPIO interface design, with pin headers on the top for easy access to other Raspberry Pi expansion boards

* for reference only, please refer to the Package Content for the detailed part list.

【PoE Power over Ethernet】

[] Just connect a network cable to a PoE device to connect the Raspberry Pi to the Internet and power it.

* for reference only, please refer to the Package Content for the detailed part list.

【Multiple power supply interfaces】

[] Onboard 5V and 12V pin header power interfaces, the 5V interface outputs a total power of up to 4.5A (the total output of 12V and 5V does not exceed 25W), which can power the Raspberry Pi and other devices at the same time

* for reference only, please refer to the Package Content for the detailed part list.

【Installation Instructions】

[] Stick thermal paste on the Raspberry Pi, install the metal heat sink, and then assemble the expansion board.

* for reference only, please refer to the Package Content for the detailed part list.

【Size】

[] PoE-M.2-E-KEY-HAT+

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com