【First-level Authorized Agency Certificate】

【Note】

[] The PCB Color shipped Randomly. Do not Order if you mind.

[] This is a Linux Board , You can not run it On Raspberry Pi Pico IED

[] This board only refers to the GPIO pin layout of RPi PICO to be Compatible with PICO expansion boards. 

It is different from PICO and cannot share PICO software.”

【Overview】

[] Milk-V Duo 256M is an ultra-compact embedded development platform based on the SG2002 chip. It can run Linux and RTOS, providing a reliable, low-cost, and high-performance platform for professionals, industrial ODMs, AIoT enthusiasts, DIY hobbyists, and creators.

【Specification】

[] Processor : SG2002 

[] Memory : DDR2 256MB

[] Storage : 1x Mirco SD slot,1x SD NAND solder pad

[] USB : 1x Type-C for data and Power,1x USB2 solder pad

[] Camera : 1x 16P FPC connector (MIPI CSI 2-lane)

[] GPIO : up to 26 Pins available for general purpose I/O（GPIO）

[] Size : 21mm*51mm

【Features】

Processor

[] SG2002 processors

[] Integrated CVITEK TPU for smart detection Like neural networks hardware accelerators, AI image recognition.

[] Supports H.264/H.265 video encoding, up to 2880x1620@20fps.

[] Compatible with high-definition CMOS sensors.

[] Programmable frequency output for sensor clock.

[] Comprehensive ISP features for image optimization.

[] Partial OpenCV library support with CV hardware acceleration.

[] 16-bit audio codec with built-in mic input and output functions.

[] Flexible network configurations with 1 Ethernet PHY.

CSI-2 (MIPI serial camera)

[] Features a 16-pin FPC interface for 2-lane MIPI camera input.

[] Operates I2C, CLK, and RST signals at a 1.8V voltage level.

Ethernet

[] Milk-V Duo includes SG2002 chip with a 100Mbps PHY.

[] PHY is linked to a 5-pin solder pad.

[] External transformer and RJ45 socket are needed for Ethernet use.

USB

[] USB 2.0 compliant, backward compatible with USB 1.1.

[] Supports various speed modes, Host/Device functionality, and transfer protocols.

[] Expandable interfaces via USB Hub (up to 127 devices).

[] Power-saving mode, supports HID devices.

[] Functions as USB slave device with configurable software.

[] USB Type-C for storage media access.

Micro SD

[] SDIO0 is compatible with Secure Digital Memory (SD 3.0) protocol.

GPIO​

[] Up to 26 GPIO pins on the MilkV-Duo 40-pin header provide access to internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.

[] Up to 3x I2C

[] Up to 5x UART

[] Up to 1x SDIO1

[] Up to 1x SPI

[] Up to 2x ADC

[] Up to 7x PWM

[] Up to 1x RUN

[] Up to 1x JTAG

Board Specifications

[] Single-sided PCB

[] Dimensions: 51×21mm

[] Thickness: 1mm

[] Type-C port located on the top edge

[] Dual castellated/through-hole pins around the remaining edges

[] Can be used as a surface mount module or in Dual Inline Package (DIP) format

[] 40 main user pins on a 2.54mm (0.1") pitch grid with 1mm holes

[] Compatible with veroboard and breadboard

【Pin Definition】

【Application Examples】

【Outline Dimensions】

[] Just-Milk-V-Duo-64M x1

[] Milk-V-Duo-64M-Kit x1

[] Just-Milk-V-Duo-256M x1

[] Milk-V-Duo-256M-Kit x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com