How to flash the firmware of ESP32 C3 S3 offline?
Google Chat: zj734465502@gmail.com
+86-0755-88291180
sales01@spotpear.com
dragon_manager@163.com
services01@spotpear.com
manager01@spotpear.com
WhatsApp:13246739196
How to flash the firmware of ESP32 C3 S3 offline?
Step 1】Open the software package and enter flash_download_tool_3.9.4.exe
Step 2】 Configure flash_download_tool_3.9.4.exe
Step 3】Enter the address
Step 4】 Select the firmware
】Arduino ide exports the bin file
4.1】
4.2】
4.3】
Step 5】 Configure the parameters and select the serial port to burn (Note: the serial port selection corresponds)
After burning is completed, press the RESET button of the board
report
What? What is Arduino IDE? Why do we need this? Why cant you give us the BIn file? Why do we need to export it? Where do we get teh stuff for arduino IDE? what do we open in Aruino IDE? BAD instructions!
report
Is it in DLtemp / BIn temp? is that the right? under download panel 1? is that what we open for the missing bin file in teh top part of the bootloader?!
report
And where is reset? theer are 4 buttons with no explanation
report
None of this helped. You need to actually make an installer that works and doesnt require us to compile our own library whatever that means. you are ascammer. you sold this asa weather clock but are expecting us to load the software ? Im making sure redfdit knows to never buy your scam clocks.
report