Raspberry Pi Compute Module 3 Lite User Guide

Overview

The Compute Module 3 Lite contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM), without the 4GB of on-module eMMC flash found on the Compute Module 3. The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU.

This is all integrated on to a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi).

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Arducam 64MP Camera RK3566 Raspberry Pi 5 PCIe to M.2 5G/4G/3G HAT With RM520N-GL Jetson Nano 3G module 0.49inch OLED Screen Display 64&amp;amp;times;32 SSD1315 Arduino Raspberry Pi ESP32 Pico STM32 Magnetic Encoder Servo Motor 35KG.CM 24V 360&deg; RS485 High Precision And Large Torque RSBL35-24-HS ESP32 Thermal imaging camera Jetson Nano Development Kit JETSON-NANO-DEV-KIT Replace For Jetson-Nano-Developer-Kit-B01 RS485 TO Relay Orange Pi Zero 3 Adjustable Focus GPS LCD Driver Board NV3030B Modbus RTU Raspberry Pi 5 Box Case Ki-A PCIe to RJ45 Gigabit Ethernet All Ports To Pi's USB Side X1202 Raspberry Pi 5 UPS Board Uninterruptible Power Supply For 18650-Li-Battery (NOT includ) 4-Ports Arduino MLX90640 Raspberry Pi 5 PCIe to 2-CH PCIe FFC Dual PCIe HAT Board Pi5 Double Arduino IR Thermal Imaging Camera PoE-M.2-HAT+B User Guide