• sales

    +86-0755-88291180

Raspberry Pi ETH/USB HUB HAT (B) User Guide

Introduction

Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0

Pinout

  • The lEDs turn on if USB ports are enumerated successfully.

Hardware connection

  • To use with Raspberry Pi zero, the HUB HAT works with ejector pins
  • To use with other Raspberry Pi, the HUB HAT should be connected with USB cable


TAG: Arduino Thermal imaging USB TO 2.5G Ethernet Port Converter RJ45 RTL8156B Driver-Free For Windows/macOS/Linux/Android User Guide RV1103 Raspberry Pi 3.5 inch DSI Display MIPI LCD (E) Capacitive TouchScreen 640x480 ESP32 H2 ESP32-H2-Zero MINI Development Board For BLE/Zigbee/Thread ESP32 C3 1.44inch LCD Raspberry Pi 5 PCIE to MiniPCIe For wireless network WIFI Card USB Bluetooth FT232RNL USB TO TTL Industrial UART Can For Raspberry Pi 5 Terminal Debug Intel 11th ESP32-S3 SIM7670G 4G Development Board With Camera LTE Cat-1/4G/GNSS/GPS Global Band Portable WIFI 0.85inch Display RS232 to RS485 Industrial Modbus POE ETH RJ45 To 8-Ch Relay B RTU/Modbus TCP-Ethernet For IOT 2.8inch Capacitive TouchScreen LCD Display ST7789 CST328 240x320 For Arduino/Raspberry Pi/ESP32/Pico Raspberry Pi 5 Argon-NEO-M.2-NVME-PCIE-Expansion-Board Only For Argon NEO 5 Case (Not include) Raspberry Pi CM5 Gigabit/2.5G Dual Ethernet Expansion Board with RJ45 GPIO IO Base SC09 Serial UART Bus Servo Motor Switchable 2.3kg 300Angle LuckFox Pico SpotPear