Raspberry Pi Pico ALL GPIO TEST Board

Pico ALL GPIO TEST Board use tutorial

1. Please refer to the official link to install Thonny IDE

https://projects.raspberrypi.org/en/projects/getting-started-with-the-pico/2

2. Connect the hardware

(1)

（2）

3. Run the program

Open the software

phenomenon:

Run led project , LEDs will flash
Run button project , press the button, a led on, if you don't press the button, a led off
Run adc project , rotate the Adjustable resistance , LED brightness will be changed

Resources

Schematic

Program

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： User Guide ESP32 Milk-V Duo S Usage of USB Type A interface ESP32 ST7789 configuration Attitude Sensor Raspberry Pi RTC WatchDog HAT (B) AI Machine Vision Kit OAK-D-POE JPEG Encoder 12MP IP67 Waterproof 4TOPS OpenCV Camera Raspberry Pi 5 ABS Case Raspberry Pi 1.3inch Raspberry Pi screen Power Manager Module LuckFox Pico plus Raspberry Pi DSI Raspberry Pi 4B UGV Rover PT AI OpenCV Robot Car MediaPipe For Raspberry Pi Raspberry Pi Camera TTL UART To CAN Raspberry Pi Pico Display ESP32 Mini TV Modbus RTU

Raspberry Pi Pico ALL GPIO TEST Board User Guide

Resources

Program

To：

Email(support)

Raspberry Pi Pico Expansion Board Pico all gpio test board led key adc Pico starter board easy board