• sales

    +86-0755-88291180

Jetson Nano IMX219-77IR Camera User Guide

Introduction

IMX219 Camera, 800 megapixels and 77 FOV. Compatible with Jetson nano, support night vision. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare and the StereoPi board.


Hardware connection

  • Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
  • Connect a HDMI LCD to Jetson Nano

Software setting

  • Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
  • Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
  • If you find that the image captured is red. You can try to download .isp file and installed:
wget https://www.waveshare.com/w/upload/e/eb/Camera_overrides.tar.gz
tar zxvf Camera_overrides.tar.gz 
sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/
sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp
sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp

TAG: Pi 5 PCIe to M.2 NVMe SSD Board Zero LCD HAT (A) user guide Raspberry Pi Pico 1.54inch LCD display 240×240 IPS 1.54 inch screen Raspberry Pi 64MP Camera HDMI to RGB Arduino MLX90640 Jetson Orin NX Case RV1103 SC3336 ESP32-S3 0.85inch LCD ESP32-S3 Industrial 8-CH Relay IOT LAN WiFi /Bluetooth /CAN /RJ45 Ethernet /POE 7.5 inch Passive NFC e-Paper V2 BW Display 7.5inch E-ink Screen No Need Battery Wireless Powered Data Transfer For Mobile APP USB TO TTL Mini FT232 UART Communication Converter Original FT232RNL Raspberry Pi 5 PCIe to 4-CH M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times Arduino MLX90640 Finger Vein Scanner Module (A) Cortex M4F UART 3.3V TTL UL94-5VB IP56 Better Than Fingerprint Recognition Raspberry Pi 7inch DSI luckfox-pico-ultra-w-gpio Use Jetson 64MP Camera NanoKVM-Lite-Quick-Start RS485 Bus