Milk-V Duo USB terminal

一、Update RNDIS driver：

After burning the image, connect one end of the USB cable to the computer and the other end to the MILKV DUO core board. Once the system indicator light on the core board starts blinking, check the Device Manager on the computer. At this point, you will see an exclamation mark next to the “RNDIS” option under the “Other devices” section.

Select RNDIS and right-click to select.“Update driver”

Select "Browse My Computer to Socket Drivers"

Select "Let me choose from a list of available drivers on my computer."

Pull down and select “Network Adapter”

Select "Microsoft" in the vendor column and "Remote NDIS Compatible Device" in the model column.

Finally, when the "Update Driver Warning" appears, select "Yes" to update the RNDIS driver.

After updating the RNDIS driver, a new device named “Remote NDIS Compatible Device” will appear in the Network Adapters section. This indicates that the RNDIS driver update has been completed successfully.

二、Remote connection of MILKV DUO core board with SSH terminal (Example: PuTTY )

Host Name input：192.168.42.1 （ID is fixed.）, Port select 22

password:milkv

You can remotely enter the operating system.

TAG： Raspberry Pi 1.3inch Raspberry Pi 5 NVMe Milk-V RJ45 Arducam Spotpear SpotPear CH340 driver UART To Ethernet Round Rotary LCD touch screen 1.28inch 1.6inch 2.1inch Knob central control lighting LCD Raspberry Pi Pico Display SpotPear ESP32-S3 0.85inch LCD spotpear Magnetic Encoder Servo Motor 45KG.CM 24V 360° RS485 High Precision And Large Torque luckfox-pico-ultra-w-gpio Use ESP32-S3 LCD Driver Board RGB/SPI N8R8 For 2.1/2.8/4inch Captive TouchScreen Display Round Jetson Nano Raspberry Pi RTC WatchDog HAT (B) RS232/485/422 To CAN PC USB Monitor Screen

Milk-V Duo USB RNDIS Virtual Network Terminal

【First-level Agency】Milk V Duo Linux Board RISC V CV1800B RAM DDR2 64M Compat with Raspberry Pi Pico