Milk-V Duo Image writing

一、Run Win32DiskImager software, select image file and device, and click "Write".

二、Upon successful writing, you can safely eject the USB drive.

三、Insert the SD card into the slot on the MILKV DUO development board, power it on with a USB 5V connection, and wait for about 5 seconds. The blue system running indicator light will blink, indicating that the system is running normally.

TAG： Raspberry Pi 5 PCIe to M.2 NVMe SSD Adapter Board C HAT Pi5-PCIe-2280-2242-2230 Industrial 4-ch RS485 DC Detection Module Modbus RTU DIN Rail Raspberry Pi 5 PCIe to 4-CH M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times Raspberry Pi Camera Raspberry Pi 5 ESP32-S3 Nano ESP32-S3R8 development board compatible with Arduino Nano ESP32 LuckFox SC3336 ESP32-S3FH4R2 Matrix 8x8 RGB-LED-WiFi Bluetooth QST Attitude Gyro Sensor QMI8658C Arduino Python ESP32 Thermal imaging camera Digital Photo Frames EchoEar 1.85 inch Round TouchScreen 1.85inch QSPI LCD 360*360 CST816T ST77916 ESP32 1.54 inch E-Paper Smart Watch display Screen 200x200 Ultra-low power For Arduino/Micropython/RTOS For Watchy FT232RNL USB TO TTL Industrial UART (C) User Guide ESP32 S3 LCD Camera Development Board 2 inch Display QMI8658 Sensor / Battery Port LVGL/HMI For Arduino Raspberry Pi display Raspberry Pi 5 CR2032 Raspberry Pi Fisheye Camera IMX378 12.3MP 190° Wide Angle Roller shutter Raspberry Pi Pico 2 RP2350 Core2350B Core Board PSRAM Raspberry Pi 5 Official Original PCIe to M.2 HAT+ Compact Expansion Board NVMe SSD spotpear

Milk-V Duo Image writing

【First-level Agency】Milk V Duo Linux Board RISC V CV1800B RAM DDR2 64M Compat with Raspberry Pi Pico