Overview

CM4-NVME-NAS-BOX is an all-in-one mini-computer, mainly designed but not limited to homes, small home offices, etc. Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems is required. On-board infrared, audio, and other modules.

Notes

Do not unplug any device except the USB when it is charged.
The Type C port can be used as a power supply or as a USB SLAVE interface to program images.
In order to ensure the normal power supply of CM4, please do not connect other devices when using the Type C interface to program the image.
When CM4 is in normal use, it needs to provide a 5V 2A or higher power supply for CM4. Otherwise, problems such as automatic shutdown and frequency reduction may occur.
The module does not have any protection, please do not short-circuit the power supply.
USB2.0 is closed by default, if you want to open it, you need to add dtoverlay=dwc2,dr_mode=host in config.txt.

Assembly Tutorial

User Guide

Click here to see how to install a NAS system

USB2.0

USB

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Jetson 1.5inch LCD TTL UART To CAN Mini 4.26inch ESP32-S3 1.28inch Round LCD WIFI Configuration PCIe M.2 NVMe Dual SSD WiFi Wireless ESP32 DDSM Motor Driver HAT For Direct Drive Servo Hub Motors For Raspberry Pi 240x240 1.54inch OLED user guide Raspberry Pi 5 Active Cooler Raspberry Pi CM5 to Pi 5 Expansion Board With USB microphone & Audio Port ESP32 S3 Development Board 1.85 inch Round LCD Display 360&amp;amp;times;360 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino LCC-14 Raspberry Pi 1.44inch LCD display HAT Milk-V Duo 1.33TFLOPS RAM-4G eMMC-16 High Performance AI at the Edge NanoKVM-Lite-Quick-Start SpotPear RS232 to Ethernet 3.5inch RPi LCD (A) Manual Configuration

Raspberry Pi CM4-NVME-NAS-BOX User Guide