• sales

    +86-0755-88291180

Putting the UF2 file into the pico

(1) Download, compile and run the Pico HDMI Board sample program: (Download:)

 cd ~/Pico HDMI Board /software/build

sudo rm -rf ./*

export PICO_SDK_PATH=../../pico-sdk


(Based on your actual download path, this path means that the pico-sdk path is below the previous directory of the compilation folder.)


cmake -DPICO_COPY_TO_RAM=1 ..

make -j$(nproc)


After that, uf2 files will be generated under build.


(2) Press and hold BOOTSEL of Pico, connect Pico to USB of Raspberry Pie with Micro USB cable, and then release it.



Open the build folder in the actual program folder and pull the main.uf2 file into the window above.





Phenomenon:


Run the screen program, and the picture can be seen on the screen.

TAG: Raspberry Pi 5 5V5A Power RV1103 Program Raspberry Pi 5 Audio Card Raspberry Pi GPS GNSS Expansion Board L76K Beidou (BDS) GLONASS QZSS A-GNSS Also For Jeston MAX9296 GMSL Camera Adapter Board 2-Ch High-Speed And Low-Latency Transmission For Jetson Orin Nano/NX ESP32-S3 AI 1.54-inch (G) e-Paper Ink Screen 1.54inch Display AIoT Development Board Deepseek Raspberry Pi Pico 2 RP2350A 1.54inch TouchScreen 1.54 inch LCD Display Development Board 240×240 Tutorial ESP32 Arduino Thermal imaging Industrial USB TO RS232/485 Serial UART Converter FT232RNL Compact Size Spotpear Raspberry Pi 5 RTC Box ESP32 C3 Round LCD Development Board Electronic EYE 0.71 inch Display Watch Screen GC9D01 160x160 wide dynamic range ESP32-C6 RS232 to Ethernet Rasberry Pi 5 PCIe TO MiniPCIe 4G Gigabit Ethernet RJ45 USB HUB HAT+ SIM7600G-H/EG25-G Jetson Nano Development Kit JETSON-NANO-DEV-KIT Replace For Jetson-Nano-Developer-Kit-B01