Note: Do not include CM4, Please Buy alone.

   Overview

• CM4-DUAL-ETH-MINI, a baseboard that can be used with Raspberry Pi Compute Module 4,
• supports 5V DC Type-C interface power supply, and features dual Gigabit Ethernet ports,
• single-channel USB2.0 with a fan interface and standard Raspberry Pi 40Pin interface,
• which is suitable for scenarios requiring multiple network ports such as soft routing.

   Specifications

• CM4 SOCKET : suitable for all variants of Compute Module 4
• NETWORKING : Dual Gigabit Ethernet RJ45 connector
• USB : USB 2.0 Port
• PIN HEADER : Raspberry Pi 40PIN GPIO header
• STORAGE : TF card socket for Compute Module 4 Lite (without eMMC) variants
• FAN HEADER : 4-wire SH1.0 port, allows speed adjustment and measurement, 5V
• POWER INPUT : 5V, Type-C interface
• DIMENSIONS : 55.0 × 68.0mm

* Please refer to the part list for detailed package content

• Note : Do not include CM4
• Product Model : CM4-DUAL-ETH-MINI
• Feature : Dual Gigabit Ethernet Base Board

• Product Model : CM4-DUAL-ETH-MINI-BOX
• Feature : Dual Gigabit Ethernet Mini-Computer Kit. In addition to the Dual Gigabit Ethernet Base Board, it is equipped with Aluminum Alloy case, fan and power supply adapter

Better Protection For The Base Board, Comes With Cooling Fan For Efficient Heat Dissipation

for reference only, CM4 is NOT included.

Standard CM4 Socket And 40PIN GPIO Header

Suitable For Compute Module 4 Lite/EMMC Series Module

for reference only, CM4 is NOT included.

Each Cut-Out Is Completely Aligned With The Connector

Magnetic Removable Top With The Location Columns, Easy To Fix And Better Protection For The GPIO Pins

Metal Case For Large Area Thermal Conductivity And Heat Dissipation

Built-In Speed-Adjustable Fan With Cooling Fins, More Efficient

Suitable For Raspberry Pi Or Other Industrial Occasions With Special Function Requirements

• 1. 40PIN GPIO header : for connecting sorts of HAT
• 2. M4 Socket : suitable for all variants of Compute Module 4
• 3. RJ45 Dual Gigabit Ethernet Port
• Dual RJ45 Gigabit Ethernet ports, 10/100/1000M compatible
• ETHERNET 0: CM4 original network port
• ETHERNET 1: PCIe extended network port
• 4. USB 2.0 Type A port : for connecting sorts of USB devices
• 5. FAN header : for connecting cooling fan, allows speed adjustment and measurement
• 6. Reset button
• 7. Boot switch
• ON: CM4 would be booted from USB-C interface
• OFF: CM4 would be booted from eMMC or TF card
• 8. Type-C port : 5V/2.5A power supply, or used for eMMC programming
• 9. TF card slot : for connecting a TF card with pre-burnt image (Lite variant ONLY)
• 10. RTL8111H : Gigabit NIC chip
• 11. Indicator : 
• PWR: indicating the power supply status of Raspberry Pi
• SYS: indicating the working status of Raspberry Pi
• 12. SYSTEM switch
• EEPROM_WP: Prevent EEPROM from being overwritten
• WiFi_DIS: WiFi disabled, only for CM4 version with wireless
• BT_DIS: Bluetooth disabled, only for CM4 version with wireless

   Video

CM4-DUAL-ETH-MINI

CM4-DUAL-ETH-MINI x1

CM4-DUAL-ETH-MINI-BOX

1. CM4-DUAL-ETH-MINI + metal case (assembled) x1
2. OPTIONS 5V 3A power adapter x1
3. Screwdriver x1
4. Thermal tape 2PCS x1
5. Black anti-slip rubber 4PCS x1