3.52inch e Paper e Ink Display Module 360×240 SPI for Arduino / STM32 / Raspberry Pi

3.52inch e Paper e Ink Display Module 360×240 SPI for Arduino / STM32 / Raspberry Pi

$18

Brand：Spotpear

SKU：0201156

Date：2022-08-19 15:38

Part Number：

3.52inch-e-Paper 3.52inch-e-Paper-HAT

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

3.52inch e-Paper e-Ink Display Module 360×240 SPI for Arduino / STM32 / Raspberry Pi

Note: Do not include Raspberry Pi, Please Buy alone.

Features

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header,
supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual
(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Specifications

Size: 3.52inch
Outline dimension (e-Paper): 84.7 × 54.41 × 1.18 mm
Outline dimension (e-Paper Module): 86.5 × 57 mm
Display size: 74.51 × 49.67 mm
Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Display color: Black/White
Gray scale: 2
Full refresh time: 1.5s
Refresh power: <25mW (typ.)
Standby current: <0.01uA (almost none)
Dot pitch: 0.207 × 0.207 mm
Resolution: 360×240 pixels
Viewing angle: >170°

Advantages Of EINK

E-Paper Display Utilizes Microcapsule Electrophoretic Technology For Displaying, The Principle Is: Charged Particles Suspended In Clear Fluid Will Move To Sides Of Microcapsule When Electric Field Is Applied, Making The Microcapsule Become Visible By Reflecting Ambient Light, Just As Traditional Printed Paper.
E-Paper Display Will Clearly Display Images/Texts Under Lamplight Or Natural Light, Requires No Backlight, And Features Nearly Up To 180° Viewing Angle. It Is Usually Used As E-Reader Due To Its Paper-Like Effect.

Standard Raspberry Pi 40PIN GPIO Header

Similar To The Size Of Raspberry Pi, Compatible With The Size Of Raspberry Pi 4B / 3B / 3B+

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin