Raspberry Pi 5.83 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32

Raspberry Pi 5.83 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32

$46.9

Brand：SpotPear

SKU：010607100000

Date：2025-11-06 15:06

Part Number：

5.83inch e-Paper (G) 5.83inch e-Paper HAT (G)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

5.83-inch e-Paper (Red, Yellow, Black, White) E-Ink Display Module, 648 × 480 Pixels, SPI Communication

5.83″ E-PAPER (G)

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Version Options

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with online development resources and manual (e-Paper Driver HAT circuit diagram, examples for Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32)
Optional for e-Paper Driver HAT:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
- Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	Red/Yellow/Black/White
OPERATING VOLTAGE	with driver board: 3.3V/5V	DISPLAY COLOR	Red/Yellow/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	Raw display: 125.40 × 99.50 × 1.20 (mm)	FAST REFRESH TIME	12s
OUTLINE DIMENSIONS	driver board: 30.5 × 65 (mm)	FULL REFRESH TIME	20s
DISPLAY SIZE	118.78 × 88.22 (mm)	REFRESH POWER	<100mW
DOT PITCH	0.1833 × 0.1833 (mm)	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	648 × 480 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards And Jetson Nano

Raspberry Pi in the photo is NOT included.

Optional For E-Paper Driver HAT

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32

VCC	3.3V/5V
GND	Ground
DIN	SPI MOSI pin
SCLK	SPI SCLK pin
CS	SPI chip selection, low active
DC	Data / Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output
PWR	Power control pin

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Outline Dimensions

[] 5.83inch e-Paper (G)

[] 5.83inch e-Paper HAT (G)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!