Raspberry Pi X862 M.2 NGFF SATA SSD User Guide

Overview

This is the X862 M.2 NGFF SATA SSD Shield for Raspberry Pi 4 model B, it provides a complete storage solution for raspberry pi 4. It supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230.

Important NOTE:

This X862 is not fit to ROCK64 and Raspberry Pi 3B+ /3B because the difference of USB 3 position. Please refer to X860 if you want use M.2 NGFF SATA SSD on the Raspberry Pi 3B+/3B or ROCK64 board.

Features

FOR USE WITH	Raspberry Pi 4 Model B
Operating System	All Raspberry Pi operating systems
KEY FEATURES	Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD Shield Supports up to 2TB m.2 NGFF SSD solid-state drive Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230^[1] Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4 Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying ^[2] LED blue indicator indicates drive status External self-powered or USB bus-powered Onboard DC jack & XH2.54 connector for extra SSD power supply Specially-made USB3.1 jumper to connect with Raspberry Pi - no cabling required! Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
SPECIFICATION	Power supply: 5Vdc +/-5% , Powered via USB port by Raspberry Pi 5Vdc via DC power jack or XH2.5 connector, Extra power supply for SSD Ports & Connectors: USB socket - USB 3.0 type A x1 Power input jack 5.5*2.5mm x1 XH2.54 SSD power input connector x1 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x1 PCB Size 87mm x 56mm
NOTES	↑ Additional spacer required for SSD lengths 2260, 2242 and 2230 (not supplied with X862) ↑ A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition NGFF SATA SSD is not included Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs As with all SSDs, new media must be formatted before use SSDs use exceptionally high performance storage media that will run hot when under load Older SSD drives with less efficient flash media may not perform as well as newer drives USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi4. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead.

How to Power

Q1: What to do if you find the SSD is not recognize?

A: 1. Please confirm that you use the SSD with right interface which match with the socket of your expansion shield. (Not recommend to use SAMSUNG SSD, as there will be big EMC interference.)

2. If use WiFi, please try to close WIFI to test.

3. Please use right interface M.2 SATA SSD (KEY-B) to X862.

4. Please try provide extra power to X862.

5. Please test and make sure your Raspberry Pi4 USB3 port is good one. (We get the feedback that Pi 4 USB3 port is easy to broken)

Q2: What to do if you find the 2.4G Wi-Fi is not stable when use Raspberry Pi 4 with expansion board(like X825/X857/X862/X872) connected by USB3 connector?

A: 1.Please try to use WIFI 5G AP if you find the 2.4G signal is unstable, because we found that USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. We think this is caused by the unreliability of the Raspberry Pi's wifi design. If the Raspberry Pi Foundation reserves the SMA IPEX antenna interface, everything will become easier.

Q3. Does it support booting from SSD?

A: Yes. A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition.

Q4: How to Initialize, Partition and Format a Brand New SSD in Windows

A: Please refer to Tutorial Initalize New SSD

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： EC200U C4-P01 Development Board QuecPython LTE Cat-1 Bluetooth GNSS Positioning Argon ESP32 C3 Round LCD Development Board Electronic EYE 0.71 inch Display Watch Screen GC9A01 160x160 Milk V BPI Luckfox Raspberry Pi 3.97 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32 Raspberry Pi 5 D Raspberry Pi 7.5 inch e-Paper link (H) RYBW 800x480 For Arduino / Jetson Nano / STM32 Raspberry Pi UART Tang Nano FPGA Demo Code Raspberry Pi Camera Case Industrial UART USB TO 8CH RS485 Isolated Converter For 35mm standard rail and stacked installation Raspberry Pi Camera 8MP IMX415 also For Luckfox-Omni3576 RK3576 Raspberry Pi WatchDog RP204 0.85inch LCD Raspberry Pi Pico 2 RP2350 1.8 inch AMOLED Development Board Display 368×448 TouchScreen Programmable Watch QSPI MEGA2560 R3 Raspberry Pi Pico ST7789 LuckFox SC3336

Price：

$27.89

Model：

X862-M.2-NGFF-SATA-SSD

Raspberry Pi 4 Model B X862 V.2, SATA SSD Shield, Storage Expansion Board

TAG： AS7341 PI5-ALU-CASE-C Raspberry Pi CM5 to Pi 5 Expansion Board With USB microphone & Audio Port Raspberry Pi 5 Case etc. 7inch Monitor LCD T-Embed ESP32-S3 CC1101 LILYGO Raspberry Pi DSI LCD Jetson Nano 5G module Raspberry Pi ESP32 C3 Round LCD Electronic EYE 0.71 inch Display Watch Screen GC9D01 160x160 RV1106G2 QFN128 RV1106G3 BGA313 128MB 256MB CortexA7-MCU Chip DDR2 DDR3 DDR4 OLED-LCD-HAT-A Jetson Nano Cooler Raspberry Pi 5inch DSI LCD B Display MIPI IPS 800x480 Capacitive TouchScreen ESP32 Display Allwinner H618 Raspberry Pi RP2040 LoRa-HF Raspberry Pi Pico 2 RP2350 RP2350B-Plus-W Development Board WiFi Bluetooth Radio Module 2 Raspberry Pi 5 RTC Battery