Jetson Nano SIM7600G H 4G / 3G / 2G / GNSS Module, LTE CAT4

Jetson Nano SIM7600G H 4G / 3G / 2G / GNSS Module, LTE CAT4

$75.89

Brand：Spotpear

SKU：0501201

Date：2020-08-15 16:53

Part Number：

SIM7600G-H-4G-for-Jetson-Nano

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

This is a 4G/3G/2G communication and GNSS positioning module designed for Jetson Nano, it supports global LTE CAT4 up to 150Mbps for downlink data transfer, with pretty low power consumption.

Just attach it onto the Jetson Nano Developer Kit, easily enable functions like 4G high speed connection, wireless communication, remote video monitoring, making telephone call, sending SMS, global positioning, and so on.

Features

40PIN GPIO extension header for connecting Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
Onboard 3.5mm audio jack with earphone and mic support, for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Jetson Nano/Raspberry Pi/Arduino/STM32)

Communications Specifications

	LTE	WCDMA / TD-SCDMA / CDMA 2000			EDGE	GSM/GPRS
Band	LTE-TDD B34/B38/B39/B40/B41 LTE-FDD B1/B2/B3/B4/B5/B7/B8 /B12/B13/B18/B19/B20/B25/B26/B28/B66	UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19			GSM/GPRS/EDGE 850/900/1800/1900MH
Emitting power	0.25W				0.5W@EGSM900 0.4W@DCS1800	2W@GSM900 1W@DCS1800
Data Speed	LTE CAT 4 Uplink≤50 Mbps Downlink≤150 Mbps	UMTS Uplink≤384Kbps Downlink≤384Kbps HSPA+ Uplink≤5.76Mbps Downlink≤42Mbps	TD-SCDMA Uplink≤128Kbps Downlink≤384Kbps TD-HSDPA/HSUPA Uplink≤2.2Mbps Downlink≤2.8Mbps	CDMA2000/EVDO Uplink≤1.8Mbps Downlink≤3.1Mbps	EDGE Uplink≤236.8kbps Downlink≤236.8kbps	GPRS Uplink≤85.6kbps Downlink≤85.6kbps
SIM Card	Normal SIM (Not Included)
Applicable Region	Global 4G/3G/2G

GNSS Specifications

Receiver type
- 16-channel
- C/A code
Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
Accuracy
- Position: <2.5m CEP

SMS and Audio Specifications

SMS
- Supported types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
Audio feature
- Supports echo cancellation
- Supports noise reduction

Other Specifications

Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C

What's on Board

SIM7600G-H
NAU8810 audio decoder
TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
MP1482 power chip
RT9193-33 voltage translator: translates 5V into 3.3V
40PIN GPIO header: for connecting with Jetson Nano Developer Kit
SIM card slot: supports 1.8V/3V SIM card
USB interface: for testing AT Commands, getting GPS positioning data, etc.
3.5mm earphone/mic jack
MAIN antenna connector
AUX antenna connector
GNSS antenna connector
Network status indicator
Power indicator
UART enable switch:
ON: connect UART ports of SIM7600 and Jetson Nano
OFF: disconnect UART ports of SIM7600 and Jetson Nano
Operating voltage selection jumper:
VCC - 3.3V: set operating voltage as 3.3V
VCC - 5V: set operating voltage as 5V
PWR control config:
PWR - 5V: SIM7600 auto startup on power up
PWR - D6: SIM7600 will be turned on/off by D6 pin of Jetson Nano